Wiring Connection - JVC KW-M788BH Quick Start Manual

Monitor with receiver
Hide thumbs Also See for KW-M788BH:
Table of Contents

Advertisement

Available languages

Available languages

Installation and Connection
Installation and Connection

Wiring connection

10 A fuse
¥
Purple with white stripe
Light green
]
White
/ White with black stripe
]
Gray
/ Gray with black stripe
]
Green
/ Green with black stripe
]
Purple
/ Purple with black stripe
Orange with white stripe
Light blue with yellow stripe
Blue with white stripe (12 V
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
FRONT
VIEW
CAMERA
Connect the antenna cord to the antenna terminal
USB terminal (1 m)
(USB1)5V
To the car's reverse lamp harness when
REVERSE
using the optional rear view camera
PRK SW
[
To front speakers (left) / Mid-range speakers (left) for 3-way crossover
[
To front speakers (right) / Mid-range speakers (right) for 3-way crossover
[
To rear speakers (left) / Tweeters (left) for 3-way crossover
[
To rear speakers (right) / Tweeters (right) for 3-way crossover
To the car light control switch
STEERING WHEEL
REMOTO INPUT
To the steering wheel remote control adapter (not supplied)
REMOTE CONT
350 mA)
To the power control terminal when using the optional power amplifier (Or)
ANT.CONT
P.CONT
To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna
Connect to the video out terminal of the front camera
"
Connect a USB device
1.5A
Extension wire ( ø )
To the car's parking brake detection switch harness
(For best safety, be sure to connect the parking sensor.)
Ignition key switch
Car fuse
Car battery
To the car chassis
ENGLISH
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kw-m780bt

Table of Contents