Features & Controls; Brake Pedal; Accelerator Pedal; Gearshift Lever - KYMCO UXV500 Owner's Manual

Hide thumbs Also See for UXV500:

Table of Contents

FEATURES & CONTROLS

Your KYMCO UTV is equipped with front and rear hydraulic

brakes that are activated simultaneously by the brake pedal.

Depress the brake pedal 1 to slow or stop the vehicle.

1 1 1 1 1

(Throttle pedal)

Push the accelerator pedal 2 down to increase the engine's

speed. Spring pressure will return the pedal to its original position

when foot pressure is released.

NOTE: Always check to make sure the accelerator pedal

returns normally before starting the engine. Make sure

there is adequate accelerator pedal free play before

starting the engine.

GEAR SHIFT LEVER

To change gears, stop the vehicle and allow the engine to idle,

then move the lever into the desired gear. Do not attempt to

shift gears if the engine speed is above idle or if the vehicle is

moving.

2 2 2 2 2

LOW

HIGH

range

Neutral

Reverse

Table of Contents