Table of Contents
Advertisement
6.0 WARRANTY
Electro-Tech Systems, Inc. warrants its equipment, accessories and parts of its
manufacture to be and remain free from defects in material and workmanship for a
period of one (1) year from date of invoice. ETS will, at its discretion either replace or
repair without charge, F.O.B. Glenside, similar equipment or a similar part to replace
any equipment or part of its manufacture which, within the above stated time, is proved
to have been defective at the time it was sold. All equipment claimed defective must be
returned properly identified to the Seller (or presented to one of its agents for
inspection). This warranty only applies to equipment operated in accordance with
Seller's operating instructions.
Seller's warranty with respect to those parts of the equipment that are purchased from
other manufacturers shall be subject only to that manufacturer's warranty.
The Seller's liability hereunder is expressly limited to repairing or replacing any parts of
the equipment manufactured by the manufacturer and found to have been defective.
The Seller shall not be liable for damage resulting or claimed to result from any cause
whatsoever.
This warranty becomes null and void should the equipment, or any part thereof, be
abused or modified by the customer of if used in any application other than that for
which it was intended. This warranty to replace or repair is the only warranty, either
expressed or implied or provided by law, and is in lieu of all other warranties. The Seller
denies any other promise, guarantee, or warranty with respect to the equipment or
accessories and, in particular, as to its or their suitability for the purposes of the buyer or
its or their performance, either quantitatively or qualitatively or as to the products that it
may produce. The buyer is expected to expressly waive rights to any warranty other
than that stated herein.
ETS must be notified before any equipment is returned for repair. ETS will issue an
RMA (Return Material Authorization) number for return of equipment.
Equipment should be shipped prepaid and insured in the original packaging. If the
original packaging is not available, the equipment must be packed in a sufficiently large
box (or boxes if applicable) of double wall construction with substantial packing around
all sides. The RMA number, description of the problem along with the contact name and
telephone number must be included in formal paperwork and enclosed with the
instrument. Round trip freight and related charges are the owner's responsibility.
WARNING
WOODEN
CRATES
MUST
NOT
BE
USED.
PACKAGING
OF
DELICATE
INSTRUMENTS IN WOODEN CRATES SUBSTANTIALLY INCREASES THE
CONTENT'S
SUSCEPTIBILITY
TO
SHOCK
DAMAGE.
DO
NOT
PLACE
INSTRUMENTS
OR
ACCESSORIES
INSIDE
OTHER
INSTRUMENTS
OR
CHAMBERS.
ELECTRO-TECH
SYSTEMS,
INC.
WILL
NOT
ASSUME
RESPONSIBILITY FOR ADDITIONAL COST OF REPAIR DUE TO DAMAGE
INCURRED DURING SHIPMENT AS A RESULT OF POOR PACKAGING.
29
Advertisement
Table of Contents
