Language & Units; Program Language; Voice Language; Units - Clarion MAP670 Owner's Manual

Note: You have a few more ways to influence routing and route recalculation in
Advanced settings Route options (Page 76 ).
5.5 Language & Units
Here you can set the languages, measurement units, and date and time formats
used by Clarion.

5.5.1 Program language

This button displays the current written language of the program. By tapping the
button you can select from a list of available languages. Clarion will have to be
restarted if you change this setting. Clarion will ask for confirmation before it restarts.

5.5.2 Voice language

This button shows the current language of the voice guidance. By tapping the button
you can select from a list of available languages and speakers. Tap any of these to
hear a sample voice prompt. Just tap OK when you have selected the new spoken
language.

5.5.3 Units

You can set the distance units to be used by the program. Clarion may not support
all of the listed units in some voice guidance languages. If you select a measurement
unit that is not supported by the chosen voice guidance language, you will see a red
warning message under the selector.
5.5.4 Set Date & Time Format
You can set the date and time format displayed by Clarion. Various international
formats are available.
71