Automatic; Ask First; Disabled; Map Settings - Clarion MAP670 Owner's Manual

5.1.7.1 Automatic

The route will be recalculated automatically a few seconds after you go astray.

5.1.7.2 Ask First

Clarion can also ask your preference each time you leave the planned route. The
route will not be recalculated until you make your choice from the menu that
automatically appears (also explained here: Page
Your options are:
• Recalculate: Clarion will recalculate the route with the previous settings. The
result is the same as if Automatic recalculation was selected.
• Drop Next Via Point / Delete Route: Clarion will remove the next via point from
the list and recalculate the route without it. If you have only one target left, the
label of the button will be Delete Route, and it will end navigation.
• Bypass: if you have deviated from the original route because of a traffic jam or
roadworks, you can instruct Clarion to avoid the original route for a specified
distance.
• Cancel: you can exit without recalculating the route. Navigation stops and will be
activated again when you find your way back to the original route.

5.1.7.3 Disabled

If you stick to the original route, and you wish to get back to it on your own, you can
disable recalculation. This way guidance will stop until you return to the
recommended route on your own.

5.2 Map settings

You can set a few parameters determining the appearance of the maps in Clarion.
41 ).
65