User manual for MERUS™ audio amplifier configurator
MA2304DNS/MA2304PNS
The MERUS™ audio amplifier configurator
2.3
MCU connected mode
If the MA2304xNS device is not detected, the following screen will appear instead:
Figure 10
MCU connected mode
In this case, there is still connection to the onboard MCU, but not the amplifier.
This screen only contains a refresh button and a green connection light indicating that a connection is made
with the onboard MCU.
If the connection light turns red, it means that the MCU is not detected.
To go to the initial screen (as shown in
is set to "ON", then click the REFRESH button.
User Manual
Figure
9) make sure that the amplifier is powered and its ENABLE switch
8
V 1.1
2022-09-12