User manual for MERUS™ audio amplifier configurator
MA2304DNS/MA2304PNS
Quick start
Connect the MA2304xNS evaluation board as shown in
Figure 2
Basic MA2304xNS evaluation board configuration for use with the MERUS™ amplifier tool
Refer to the hardware user manual for default jumper and switch settings and other options.
1.3
Software installation
The MERUS™ audio amplifier configurator can be downloaded by visiting
and registering your board. Once registered, the software can be installed through the Infineon developer
center launcher or downloaded as a separate installer file. This will also install all the necessary device drivers
to communicate with the MA2304xNS evaluation board.
1.4
Firmware flash for USB MCU
Please refer to the hardware manual for step-by-step instructions on how to update the board firmware.
User Manual
Figure
2:
https://softwaretools.infineon.com/
4
V 1.1
2022-09-12