Disposal; A) Product; B) Batteries And Rechargeable Batteries; Troubleshooting - VOLTCRAFT VC950 Operating Instructions Manual

12. DISPOSAL

a) Product

Electronic devices are recyclable waste and must not be disposed of in the household waste!
Dispose of the product according to the applicable statutory provisions at the end of its service life.
Remove any inserted batteries and dispose of them separately from the product.

b) Batteries and rechargeable batteries

You as the end user are required by law (Battery Ordinance) to return all used batteries/rechargeable batteries.
Disposing of them in the household waste is prohibited!
Batteries/rechargeable batteries that contain any hazardous substances are labelled with the adjacent
icon to indicate that disposal in domestic waste is forbidden. The descriptions for the respective heavy
metal are: Cd=cadmium, Hg=mercury, Pb=lead (the names are indicated on the battery/rechargeable
battery e.g. below the rubbish bin symbol shown to the left).
You may return used batteries/rechargeable batteries free of charge at the official collection points of your community,
in our stores, or wherever batteries/rechargeable batteries are sold!
You thus fulfil your statutory obligations and contribute to the protection of the environment.

13. TROUBLESHOOTING

In purchasing the DMM, you have acquired a product designed to the state of the art and operationally reliable.
Nevertheless, problems or errors may occur.
For this reason, the following is a description of how you can easily remove possible malfunctions yourself:
Error
The multimeter does not
work.
No measured value change Is the wrong measuring function
The meter beeps «PrObE»
is displayed.
Always observe the safety information!
Repairs other than those described above must only be carried out by an authorised specialist.
60
Possible cause
Are the batteries dead?
activated (AC/DC)?
Are the measuring lines reliably
inserted in the measuring jacks?
Is the fuse defective?
Incorrectly connected or unsuitab-
le measuring lines
Possible remedy
Check the status. Replace the battery.
Check the display (AC/DC) and switch the func-
tion if required.
Check the proper fit of the measuring lines
Check the fuses.
Connect measuring lines correctly to meter,
replace them or change the measuring function.