Specifications - JVC SP-XF51UF Instructions Manual

Typical connection method to an amplifier
Connect the speakers to the speaker terminals of the
amplifier with the speaker cords by referring to the diagram
below.
• Make sure to match the polarity (ª and ·) when
connecting the speaker cords.
• The diagram below is an example of a typical connection.
CENTER
FRONT LEFT
FRONT RIGHT
FRONT CENTER SURROUND SURROUND
BACK
RIGHT LEFT RIGHT LEFT
SURROUND RIGHT
SURROUND LEFT
Speaker layout
Center
speaker
Front left
speaker
Surround left
speaker
SPEAKERS
Recommended to use
SP-SB101—optionally
purchased.
Front right
speaker
Subwoofer
Surround right
speaker

Specifications

SP-XF51F (Front speakers)
Type:
Speaker unit:
Frequency range:
Impedance:
Power handling capacity:
Sound pressure level:
Dimensions: 250 mm (W) x 1 104 mm (H) x 250 mm (D)
Mass:
SP-XF51S (Surround speakers)
Type:
Speaker unit:
Frequency range:
Impedance:
Power handling capacity:
Sound pressure level:
Dimensions: 250 mm (W) x 1 104 mm (H) x 250 mm (D)
Mass:
SP-XF51C (Center speaker)
Type:
Speaker unit:
Frequency range:
Impedance:
Power handling capacity:
Sound pressure level:
Dimensions:
Mass:
– 5 –
2-way 3-speaker Bass reflex type
(Magnetically-shielded type)
5.5 cm cone (x 2), 1.5 cm dome
90 Hz to 20 000 Hz
79 dB/W•m
2.6 kg each
2-way 3-speaker Bass reflex type
5.5 cm cone (x 2), 1.5 cm dome
90 Hz to 20 000 Hz
78 dB/W•m
2.5 kg each
2-way 3-speaker Bass reflex type
(Magnetically-shielded type)
5.5 cm cone (x 2), 1.5 cm dome
90 Hz to 20 000 Hz
81 dB/W•m
320 mm (W) x 75 mm (H) x 92 mm (D)
6 Ω
100 W
6 Ω
100 W
6 Ω
100 W
0.9 kg