僅 Changing The Radio Mode - Kia PICANTO 2023 Manual

Infotainment System
僅 Sound settings: You can change the
settings related to sounds, such as
location where sound will be concen-
trated and the output level for each
range.
- Position: Select a location where
sound will be concentrated in the
vehicle. Select Fade (Fader) or Bal-
ance, turn the [TUNE] knob to
select the desired position, and
then press the knob. To set sound
to be centred in the vehicle, select
Centre (Centre).
- Equaliser (Tone): Adjust the output
level for each sound tone mode.
- Speed dependent vol.: Set the vol-
ume to be adjusted automatically
according to your driving speed.
NOTICE
僅 Depending on vehicle models or spec-
ifications, available options may vary.
僅 Depending on the system or amplifier
specifications applied to your vehicle,
available options may vary.
僅 Mode popup: Set to display mode
selection window when the [RADIO]
button is pressed on the control panel.
僅 Date/Time: You can change the date
and time that are shown on the sys-
tem display.
- Set date: Set date to display on the
system display.
- Set time: Set time to display on the
system display.
- Time format: Select to display time
in the 12 hour format or the 24 hour
format.
- Display (Power Off): Set to display
the clock when the system power is
off.
5 18
僅 Language: You can change the dis-
play language.
You can also press the [CLOCK] button
to set the time.
Changing the radio mode
1. On the control panel, press the
[RADIO] button.
2. When the mode selection window dis-
plays, turn the [TUNE] knob to select
the desired radio mode and then
press the knob.
僅 Each time you press the [MODE]
button on the steering wheel, the
radio mode switches to FM ▶ AM in
order.
NOTICE
When the Mode popup is not selected in
[MENU] ▶ Mode popup, press the
[RADIO] button on the control panel to
change the radio mode.
Each time you press the [RADIO] button
on the control panel, the radio mode
switches to FM ▶ DAB (if equipped) ▶
AM in order.
Scanning for available radio sta-
tions
You can listen to each radio station for a
few seconds to test the reception and
select the one you want.
1. From the radio screen, press the
[MENU] button on the control panel.
2. When the option selection window
displays, turn the [TUNE] knob to
select Scan, and then press the knob.
僅 The system searches for radio sta-
tions with strong radio signals and
plays each radio station for about
five seconds.
Radio