Table of Contents
Advertisement
Basic DVD Player Operations
For details about DVD player operations, see pages 29 to
42.
• You can also play back MP3 and JPEG files. See pages 43
to 46.
• When using remote control, press DVD to change the
remote control operation mode to the DVD player
operation.
1
Open the Disc Tray
Before turning on the unit, turn on your TV and select the correct
video input (see the manual supplied with your TV).
• When you use a JVC's TV, you can turn on your TV by pressing
STANDBY/ON TV on the remote control and select the
video input by pressing TV/VIDEO. (If your TV is not a JVC's,
see "Operating Other Manufacturers' Equipment" on page 61.)
• For changing the OSD messages—the information on the TV
—into the desired language, see pages 47 and 49.
From the front panel ONLY
Press 0.
The unit is turned on and the disc tray opens.
The STANDBY lamp goes off and the illumination lamp lights up.
• When a disc is already loaded, pressing 3 turns on the unit and
starts playing back the loaded disc.
2
Load a Disc
Place a disc correctly with its label side up.
3
Start Playback
On the front panel
Press 3.
The disc tray closes and the unit starts playing back the loaded disc.
• You can also close the disc tray by pressing 0 on the front panel.
15
CORRECT
INCORRECT
TUNING
From the remote control
By pressing the following buttons, you can stop, advance, or reverse
playback, and locate the beginning of the title, chapter, or track.
On the front panel
From the remote control
To stop playback temporarily
Press 8.
• Pressing 3 starts playback again.
To move back the playback position by 10 seconds
(for DVD VIDEO only)
Press 3 during DVD VIDEO playback.
The unit moves the playback position about 10 seconds before the
current position, then resumes playback.
To advance or reverse playback rapidly
Press and hold ¢ or 4.
While you are pressing and holding ¢ (or 4), the unit advances
(or reverses: for DVD VIDEO and audio CD) playback 5 times as
fast as the normal speed. When you press and hold ¢ (or 4)
further, the playback speed changes up to 20 times as fast as the
normal speed.
• Releasing the button resumes the normal playback.
To locate the beginning of the chapter, or track
Press ¢ or 4.
Press ¢ (or 4) to locate the beginning of the next (current or
previous) chapter, or track.
To locate the chapter or track using number buttons
Press number buttons (1–10, +10) to select the number of the
desired chapter or track.
Ex. : To select 3, press 3.
To select 11, press +10, then 1.
To select 20, press +10, then 10.
From the remote control ONLY
About indication on the display while playing back a disc
While you are playing back a disc, the playback information
appears on the display as follows:
Ex. : When DVD VIDEO is loaded
DIGITAL AUTO
AUTO SURROUND
SPK.
DIGITAL
L
C
R
SUBWFR
LFE
LS
RS
Chapter number
Ex. : When audio CD is loaded
DIGITAL AUTO
PRO LOGIC
SPK.
L
R
SUBWFR
Track number
(
9
REW/
TUNING
/FF
FM MODE
STROBE
– TV/DBS CH +
EFFECT
CENTER
1
2
3
TEST
REAR·L
4
5
6
SURR ON/OFF
REAR·R
7
8
9
–
+
SURR MODE
SUBWOOFER
10/0
+10
100+
VOLUME
Elapsed playing time
VOLUME
Elapsed playing time
Advertisement
Table of Contents
