JVC KD-AV7010 Service Manual page 14

Dvd receiver with monitor

Hide thumbs Also See for KD-AV7010:

Enlarged version

3.2.2 Removing the drive gears and forth gear

(See Figs.2 to 4)

• Remove the display drive unit.

(1) From the both sides of the display drive unit, remove the

four screws B attaching the guide rails (L)/(R). (See Figs.2

and 3.)

(2) From the top side of the display drive unit, pull the drive

gears out of a drive gear shaft in the direction of the arrow

while holding the drive gear shaft. (See Fig.4.)

Reference:

Remove the drive gear shaft as required. (See Fig.4.)

(3) From the left side of the display drive unit, remove the

E.ring fixing the forth gear. (See Fig.4.)

(4) Remove the forth gear toward this side. (See Fig.4.)

1-14 (No.MA184)

Display drive unit

Fig.2

Guide rail (R)

Fig.3

E.ring

Forth gear

Drive gear

Drive gear shaft

Fig.4

Guide rail (L)

Display drive unit

Drive gear

Table of Contents