Marantz NR1609 Service Manual page 121

1. Version Display Mode
1.1. Actions
Version information is displayed when the device is started in this mode.
1.2. Starting up
While holding down buttons "DIMMER" and "STATUS" simultaneously, press the power button to turn
on the power.
then press the "STATUS" button to display the information in section 1.3 on the display.
b The version list is also displayed on GUI while the version is displayed on the display.
1.3. Display Order
Error information(See "1.4. Error display") → q Model destination information → w Serial Number
→ e Firmware Package → r Main μ -com → t Main 1st Boot Loader → y DSP → u Audio PLD
→ i Video PLD → o GUI SFLASH → Q0 PIMG → Q1 HEOS Version → Q2 HEOS Build → Q3 HEOS Module
→ Q4 HEOS Configuration → Q5 HEOS Locale → Q6 Restore Version → Q7 Ether Mac Address
→ Q8 WiFi Mac Address → Q9 BT Mac Address → W0 Audyssey App Interface Version
q Model destination information :
NR1609 \
\ : Region (U, N, K, F)
w Serial Number :
SN**************
e Firmware Package :
Package :****
r Main µ-com :
M:*************
t Main 1st Boot Loader :
Main FBL :**.**
y DSP ROM :
DSP :**.**
u Audio PLD :
Audio PLD:**.**
i Video PLD :
Video PLD:**.**
o GUI SFLASH :
GUI :@@$\****
@ : Model code,
$ : Brand code (Non=0, De=1, Mz=2, Mc=3),
\ : Region code (U=1, N=2, K=5, F=4, ALL=0),
* : version
Q0 PIMG :
PIMG :********
Q1 HEOS Version :
HEOS Version
"Press "STATUS" button.
*.***.***
Q2 HEOS Build :
HEOS Build
"Press "STATUS" button.
******
Q3 HEOS Module :
HEOS Module
"Press "STATUS" button.
***
Q4 HEOS Config :
HEOS Config
"Press "STATUS" button.
Production
Q5 HEOS Locale :
HEOS Locale
"Press "STATUS" button.
*****
121
Q6 Restore Version :
RSTR
"Press "STATUS" button.
************
Q7 Ether MAC Address :
*Ether MAC
"Press "STATUS" button.
******-******
Q8 Wi-Fi MAC Address :
*Wi-Fi MAC
"Press "STATUS" button.
******-******
Q9 Bluetooth MAC Address :
*BT MAC Address
"Press "STATUS" button.
******-******
W0 Audyssey App Interface Ver :
Audy IFVer:**.**