Advertisement
How to install, operate and maintain your
Smartfit Day & Night Honeycomb Blind
Installation
continued...
Operating your
Blind
Maintaining your
Blind
Feedback?
We would love to know how you
went with your installation...
Please write a review on our
website at...
www.venetablinds.com.au
Need HELP?
Call our
Customer Service team
for assistance
1300 836 382
3
Install Blind
When installing the Shoe Slider, it is suggested to secure the bottom shoe slider first, and then
unfasten the top cord to secure the top shoe slider. Please do NOT untie the top cord until the
bottom shoe slider is secured.
Please note all blind cords are interconnected.
Ensure the cords are not crossed or tangled.
Place Shoe Sliders into centre of Shoe Bases and slide towards the outer edge of Shoe as per
diagram below.
Great Job... Enjoy your new Veneta Blinds!
Lower and raise the blind using the handles on the top, middle and bottom rails.
Note the blind will close firmly at the top utilising the inbuilt magnets.
1
Dusting
Dust can be removed using a feather duster or vacuum with brush attachment on low suction.
2
Spot Cleaning
Use a warm damp cloth or a mild detergent for tougher stains.
Dab the affected area, but do not rub the fabric. Finish with just a warm damp cloth.
Allow the fabric to dry in the lowered position.
3
Ultrasonic
If ultrasonically cleaning the blind please specify that a mild solution must be used.
Note the rails should never be immersed in liquid.
(25mm Cell)
2
Advertisement
