Settings - Asko D5233 Use & Care Manual

Settings

Reprogramming
Some of the machine's functions can be reprogrammed. You get into the machine's change
program using the machine's ordinary buttons as per the instructions below. The selection
will be retained until the next time you reset this function.
Even if the machine is turned off at the main switch or loses power for any other reason,
all selections registered before the interruption of power will be retained.
Child-safe button lock
You can prevent a child starting the machine by accident or changing the settings by pro­
gramming the machine with a button lock, which requires the Temperature and Drying
buttons to be pressed simultaneously to start up the machine. The button lock will automati­
cally be reactivated after three minutes.
1. Switch off the dishwasher with the main switch.
+ 2. Hold in the Temperature and Drying buttons while pressing the main
switch. The Temperature, Drying and start symbols will flash. Release
the Temperature and Drying buttons.
3. Press the Program button – when the AUTO wash symbol is lit,
PROG PROG
the button lock has been activated.
4. Then press the Start/Stop button to store the setting.
START
STOP
or Reset:
1. Switch off the dishwasher with the main switch.
+ 2. Hold in the Temperature and Drying buttons at the same time as
pressing the main switch.
PROG 3. Press the Program button – when the AUTO wash symbol goes out
PROG
the button lock has been deactivated.
4. Then press the Start/Stop button to confirm the setting.
START
STOP