Fault Indications - Asko D5253 Operating Instructions Manual

Fault indications

Display
flashes
flashes
flashes
flashes
AUT AUT
AUT AUT flashes
To remove the fault indications from the display, turn off the main switch and then turn it
back on again.
Type of fault
Too much water
in the dishwasher
Fault with water inlet
Valve leakage
Blocked drain
Clogged filter
Customer Care Center
1-800-898-1879
www.askousa.com
Action
Phone service
Check that the water
tap is open
Shut off the water tap
and contact service
See 'Possible causes'
in chapter Trouble
shooting
Clean the filters, see
chapter Cleaning
25