Summary of Contents for Altronix eBridge100RMT Kit
Page 1
PLUS eBridge100RMT Kit IP and PoE+ over Coax or Extended Ethernet Cable eBridge100RM Receiver and eBridge100TM Transceiver Kit Installation Guide Z1409 I.T.E. 43KC More than just power. Rev. 111413 Installing Company: _______________ Service Rep. Name: __________________________________ Address: _____________________________________________ Phone #: __________________...
Page 2
100Mbps full duplex and power over Coax cable or extended CAT5e cable in a PoE+ compliant format. The eBridge100RM is powered via a PoE midspan such as the Altronix Netway series or by an endspan. The receiver passes the PoE(+) compliant power over cable to the eBridge100TM transceiver which in turn passes this power to an enabled IP Camera/device.
Page 3
Installation Instructions: Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction. Wiring should be UL Listed and/or Recognized wire suitable for the application. eBridge100TM and eBridge100RM are not intended to be connected to outside plant leads and should be installed indoors within the protected premises.
Page 4
423m CAT5e 500m 846m CAT5e 500m 423m Altronix is not responsible for any typographical errors. ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 140 58th Street, Brooklyn, New York 11220 USA | 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty MEMBER IIeBridge100RMT G19U...
Need help?
Do you have a question about the eBridge100RMT Kit and is the answer not in the manual?
Questions and answers