Choose A Tv Channel And Watch Images From External Devices - JVC HV-28D40 Instructions Manual

Remote control buttons and functions
Choose a TV channel and
watch images from external
devices
• If the picture is tilted, correct it. See
"PICTURE TILT" on page 40.
Switching between Digital
terrestrial broadcasting (DVB-T)
and Analogue terrestrial
broadcasting.
Press the TV/DTV button.
The broadcasting is switched every time the
button is pressed.
Use the number buttons:
Enter the programme number (PR)
of the channel using the number
buttons.
Example:
• PR 6 → press 6
• PR 12 → press 1 and 2
• PR 123 → press 1, 2 and 3
Use the p p buttons:
Press the p p buttons to
choose the programme number
(PR) you want.
• For Digital terrestrial broadcasting (DVB-
T), if the FAVOURITE setting in the
"Edit PR List" (see page 49) has been set,
only that programme number (PR) can be
chosen.
• For Analogue terrestrial broadcasting, an
EXT terminal can also be chosen.
Use the AV button:
Press the AV button to choose an
EXT terminal.
TV mode
Analogue
terrestrial
broadcasting
Digital
terrestrial
broadcasting
(DVB-T)
16
EXT modes
EXT-2
EXT-1
or
EXT-3
or
E3 S3
EXT-5 EXT-4
or
• You can choose a video input signal
from the S-VIDEO signal (Y/C signal)
and regular video signal (composite
signal). For details, see "S-IN (S-
VIDEO input)" on page 42.
• If you do not have a clear picture or no
colour appears, change the colour
system manually. See "COLOUR
SYSTEM" on page 31.
• If you choose an EXT terminal with no
input signal, the EXT terminal number
becomes fixed on the screen.
• This TV set has a function which can
automatically change over the input
according to a special signal output
from an external device. (The EXT-4
and EXT-5 terminals do not support
this function.)
• Since this TV is designed to make full
use of the resolution of the original
video source, the motion may appear
unnatural when the video source is
input with 625p progressive-scanning
component signals.
If this happens, change the output
setting of the connected device to 625i
interlace-scanning component signal
output. See the instructions that came
with the device for more information.
To return to a TV channel:
TV/DTV button, the p p buttons
Press the
or the number buttons.