Basic Operation (Analogue); Using The List Mode - JVC HV-28D40 Instructions Manual

Teletext function
When watching Analogue terrestrial
broadcasting:

Basic operation (Analogue)

You can view two types of teletext
broadcasts on the TV:
FLOF (Fastext) and WST.
1 Choose a TV channel with a teletext
broadcast
2 Set the VCR/TV/DVD switch to the
TV position
3 Press g (Text) button to display
the teletext
Pressing g (Text) button changes the
mode as follows:
TV mode
D1043-EN
4 Choose a teletext page by pressing
the p p buttons, number buttons
or colour buttons
To return to the TV mode:
TV/DTV
Press the
button.
• If you have trouble receiving teletext
broadcasts, consult your local dealer or
the teletext station.
• The ZOOM function will not work in
the TV and text mode or Text mode.
• You cannot operate menus when
viewing a teletext programme.
26
TEXT ---
TEXT ---
TV and text mode
TEXT ---
TEXT ---
Text mode
button or g (Text)

Using the List Mode

You can store the numbers of your favourite
teletext pages in memory and call them up
quickly using the colour buttons.
To store the page numbers:
1 Press B button to go into the
List mode
The page numbers you have stored are
displayed at the bottom of the screen.
2 Press a colour button to choose a
position. Then press the number
buttons to enter the page number
3 Press and hold down the A (Store)
button
The four page numbers blink white to
show that they are stored in memory.
To call up a stored page:
1 Press the B button to enter the
List mode
2 Press a colour button having a
stored page
To exit the List mode:
Press the B button again.