Choose A Tv Channel And Watch Images From External Devices - JVC PD-Z35DV4 Instructions Manual

Choose a TV channel and
watch images from external
devices
Use the number buttons:
Enter the programme number (PR)
of the channel using the number
buttons.
Example:
• PR 6 → press 6
• PR 12 → press 1 and 2
Use the 6 p buttons:
Press the 6 p buttons
to choose the programme number
(PR) you want or a VIDEO
terminal.
Use the 4 button:
Press the 4 button to
choose a VIDEO terminal.
TV mode
Programme
numbers
PR 1 – PR 99
• If you do not have a clear picture or no
colour appears, follow the operation
procedure "COLOUR SYSTEM" on
page 28.
• If you cannot hear the normal sound
even if the picture of the TV channel
appears normally. Follow the
description "EDIT/MANUAL" on
page 35 to use the MANUAL function
to change the SYSTEM setting.
VIDEO modes
or
or
Remote control buttons and functions
• Since this TV is designed to make full
use of the resolution of the original
video source, the motion may appear
unnatural when the video source is
input with 625p progressive-scanning
component signals.
If this happens, change the output
setting of the connected device to 625i
interlace-scanning component signal
output. See the instructions that came
with the device for more information.
• The PC sound is the same as the
VIDEO-4 sound.
To return to a TV channel:
Press the 4 button, the
6 p buttons or the number
buttons.
To use the programme number PR 0
(AV):
When the TV and VCR are connected only
by the aerial cable, choosing the programme
number PR 0 (AV) allows you to view
images from the VCR. Set the VCR RF
channel to the programme number PR 0
(AV) manually. For details, see "EDIT/
MANUAL" on page 35.
Pressing the 0 button changes the choice as
follows:
TV mode
PR 0
Programme
numbers
PR 1 – PR 99
VIDEO modes
or
or
13