Set First Ring; Text And Digit Entry Table - Gigaset A450 Manual

Advanced Set

Set First Ring

When this function is set to off, the first ring from an incoming call will not sound. This is useful
on exchanges where calling line identity is sent after the first ring.
1. Press the Menu button to enter menu selection.
2. Press the or
select.
3. Press the or
button to select.
4. Press the or
button to confirm. The unit will make an audible tone to confirm.

Text and Digit Entry Table

The following tables show you where each letter and punctuation character can be found.
Respective character table will be used when the corresponding menu language is selected.
This will be helpful when storing a name in the contacts and renaming your handset.
In editing mode, a cursor is displayed to indicate the current text entry position. It is positioned
at the right of the last character entered.
Writing Tips:
1. Once a character is selected, the cursor will move to the next position after a short pause.
2. Press the Back button to delete the last character.
buttons to select ADVANCED SET and then press the OK button to
buttons to select FIRST RING and then press the OK
buttons to select ON or OFF and then press the OK
28
Advanced Set