Remote Control - Clarion VRX756VD Owner's Manual & Installation Manual

7. REMOTE CONTROL

Remote control unit
[ SOURCE ]
[ DISC SEL ]
[
[ SET UP ]
[ RPT ]
[ SUB TITLE ]
Inserting the Batteries
1.Turn the remote control unit over, then slide the
rear cover in the direction of the arrow.
2.Insert the AA (SUM-3, IECR-6/1.5V) batteries
that came with the remote control unit facing in
the directions shown in the figure, then close the
rear cover.
Notes:
Using batteries improperly can cause them to
explode. Take note of the following points:
• When replacing batteries, replace both batteries
with new ones.
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
16
VRX756VD
[ BAND ]
[ 0-9 ]
],[ ]
[ RTN ]
[ ENT ]
[ SCN ]
[ AUDIO ]
Signal transmitter
Operating range: 30˚ in all directions
[ MUTE ]
[ VOLUME ]
[ P.TIME ]
[ DISP ]
[ SEARCH MODE ]
[ MENU ]
[ DVD TITLE ]
[ ],[ ]
[ 2-ZONE ]
[ RDM ]
[ SLOW ]
[ ANGLE ]
AA (SUM-3, IECR-6/1.5V)
Batteries
Rear side
[ ISR ]
[ PBC ]
Rear cover