MAGIMIX 11630 Manual page 23

RISK OF BURNS
• DO NOT process hot ingredients (solid or liquid) in the BlendCups or
mill attachment, as blending hot foods in a lidded jug can lead to a
build-up of pressure, forcing out scalding steam or liquids.
• Processing hot foods in the main jug: blending hot ingredients at high
speed can lead to a build-up of pressure, forcing out scalding steam
or liquids. Always take care when pouring in a hot liquid, as it may
suddenly boil up and escape from the jug.
• Never introduce hot ingredients (solid or liquid) if they are over
60 °C in temperature. Always make sure the lid is firmly fitted but
the measuring cap is only loosely positioned, to allow any steam to
escape. Always use the SOUP programme or start at a low speed and
gradually increase it. Never use the PULSE button.
MAINS CONNECTION
• Your appliance must be connected to an earthed socket with the
original power cord.
• Check that the voltage indicated on its identification plate corresponds
to the voltage of your mains supply.
• Never allow the power cord to dangle over the edge of your worktop
or counter, and make sure that it does not come into contact with hot
surfaces.
AFTER-SALES SERVICE
• If the power cord has been damaged, it must be replaced by the
manufacturer, a Magimix-approved service agent or a similarly
qualified person, in order to avoid all risks.
• The use of parts that are not recommended or sold by Magimix may
result in injury, fire or electric shock.
KEEP THESE SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
FOR FUTURE REFERENCE
21