Ericsson R320s Working Instruction page 3

#
5
6
7
8
9
10
11
3/000 21-1/FEA 209 544/21 D
Figure Instruction
Slide in the top tool under the
front between the LED-diode
and the buzzer holes
Place the side-opening tool in
the gap at the top on the phone
and slide it down the phone.
Make sure that the tool always
has contact with the frame
under this operation. Repeat
with the other side
Open the phone at the top a
little bit and wobble the frame
sideways to loosen the frame
Remove the four display
assembly screws
Remove the display assembly
and place it on the ESD-
protected surface
Remove the three board
screws.
Remove the board and the
metal-gasket carefully from
the frame.
Mechanical Working Instruction
Note
Make sure the SIM-card is
removed
3(20)