Page 1
Installation and Operating Procedures Aqua Sense Taps Automatic Taps - Deck and Wall Models. AquaSense taps are suitable for use in Ablution troughs; Basins and Kitchen sinks Note: Surgeon models have a 20 second run-on after use. Wall installation model Deck installation model High Neck model Wall Mounted (battery) Model Code: 42226NZ (Surgeon)
General Fitting Instructions. 1. Preparation You must read these instructions thoroughly before attempting to install this tap. First check the solenoid valve supplied is suitable for the site water pressure and conditions. The standard valve requires 50kPa - 800kPa water pressure and 5º - 55º C water temperature. If your water pressure is outside the stated range please contact the manufacturer.
Components SUPPLIED: 1. Wall or Deck mounted Tap with fixing nut and washers. 2. AC or DC Power supply 3. 6 V DC Latching Valve 4. Brass Nipple Nut and Olive 5. JG 15mm X 1/2 BSP adapter NOT SUPPLIED: 1.
Page 5
Installation details Push together Rotate fixing against thread to lock connection Multi / AC mains Installation NOTE: You must only use the Zenith power supply unit. The use of an alternative unit may cause damage. TAP1 TAP2 TAP3 D623 Splitter lead Fixings &...
Re-assemble in the reverse of above. Note the position of all parts in the diaphragm for correct assembly. To order quote Zenith part number 90279NZ Diaphram Kit. The valve will require periodic cleaning and servicing. please contact Zenith for servicing.
Page 7
This page intentionally left blank Page 7 of 8 81424NZ June 2012 v1.01...
Full warranty details may be found on the website Registering Your Purchase Registering your Zenith installation on the website may help to establish date of installation should it become necessary to service the appliance under terms of the Zenith warranty. To register your installation go to www.zenithheaters.co.nz and look under the heading “Warranty”, or forward the completed product registration form (enclosed) to your nearest Zenith...