Table of Contents
Advertisement
en operation
To pause the programme, after ap-
2.
prox. 10 minutes, press inicio/
pausa+carga.
To resume the programme, after
3.
the desired soaking time, press
inicio/pausa+carga.
13.11 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Requirement: A programme has
started.
→ "Starting the programme", Page 31
Press inicio/pausa+carga.
1.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 22
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press inicio/pausa+carga.
5.
13.12 Cancelling the pro-
gramme
Press inicio/pausa+carga.
1.
Open the appliance door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
programme.
– If the water level is high, start
the
programme or select a
suitable programme for draining.
→ "Programmes", Page 24
Remove the laundry.
3.
→ "Unloading the laundry",
Page 32
32
13.13 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡ Rinse Stop is activated.
→ "Buttons", Page 23
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
Set the
programme or a pro-
1.
gramme for draining the water.
→ "Programmes", Page 24
Press inicio/pausa+carga.
2.
13.14 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.15 Switching off the appli-
ance
Turn the programme selector to
1.
Turn off the tap.
2.
Wipe the rubber gasket dry and re-
3.
move any foreign objects.
Leave the appliance door and de-
4.
tergent drawer open so that resid-
ual water can evaporate.
.
Advertisement
Table of Contents
