Page 1
ESME Queen Assembly Instructions Hardware included in headboard carton to attach bed feet and center support system. Φ6*20MM Φ6 MM H=7.5CM Metal Slats Center support legs Φ6*25MM H=13.5CM 8PCS 12PCS 2PCS 4PCS 4PCS 4PCS *Bolt B and Washer E are factory installed* Step#1 Retrieve bed feet from carton fastened behind the headboard.
Page 2
ESME Queen Assembly Instructions Hardware included in headboard carton to attach bed feet and center support system. Φ6*20MM Φ6 MM H=7.5CM Metal Slats Center support legs Φ6*25MM H=13.5CM 8PCS 12PCS 2PCS 4PCS 4PCS 4PCS Step#3 Attach steel center support legs (J) to the Metal slat (G) using Wrench (I), Bolt (T) and Washer (D).
Page 3
ESME Queen Assembly Instructions Hardware included in headboard carton to attach bed feet and center support system. Φ6*20MM Φ6 MM H=7.5CM Metal Slats Center support legs Φ6*25MM H=13.5CM 8PCS 12PCS 2PCS 4PCS 4PCS 4PCS Step#6 Attach the slip cover to the side rails and footboard.