Control Buttons; Operating Instructions; Power Up; Counting Instruction - Prime Dynamic 995EV User Manual

3.1. Control Buttons

Start : To start counting process (under Manual Mode).
C : To clear counting memory.
Add : To set accumulation counting.
Batch : To set batching counting.
+1 / -1 : To add or subtract batching numbers per 1.
+10 : To add batching numbers per 10.
Auto : To select automatic starting or manual starting.
Voice : To open/close voice indicator.
UV : To set on/off UV counterfeit detection method
MG : To set on/off MG counterfeit detection method
SET : To set further settings (only for technician)
HIGH QUALITY AND
4

4. Operating Instructions

4.1. Power Up

Connect the power cord to the machine (power outlet), then plug it to apower source and turn
the switch on; the unit will conduct a self-check by spanning the feeding roller. The counter
display will show " 0 "when the unit is ready <the machine is in its normal working condition>.

4.2. Counting Instruction

BILL COUNTER WORLD
Note: There are two kinds of starting modes: Automatic and Manual.
-Automatic Mode
-Manual Mode
Note:
* Press the "Auto" button to change between Auto or Manual start mode.
Auto Mode, the LCD screen will show "AUTO."
In auto mode, once the bills are correctly placed in the hopper, the machine will start counting
automatically. The number of counted bills and their value will be shown on the LCD display.
In Manual-Mode, after placing the bills, press "Start" to start counting.
: Machine will start counting process automatically when banknotes
are put in the hopper.
: Machine will start counting process after banknotes are put in the
hopper and "Start" button is pressed.