Download Print this page

JVC XV-N320B Instructions

Jvc xv-n320b: instruction manual
Hide thumbs

Advertisement

DVD PLAYER
Warnings, Cautions and Others
XV-N320B
CAUTION
RISK OF ELECTRIC SHOCK
XV-N322S
DO NOT OPEN
INSTRUCTIONS
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
®
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The
lightning
flash
V I D E O
symbol, within an equilateral triangle is
GNT0059-001B[US]
intended to alert the user to the presence
EN
1104MOC-MW-SC
of uninsulated "dangerous voltage" within
©2005 Victor Company of Japan, Limited
the products enclosure that may be of
Region code of DVD VIDEO
sufficient magnitude to constitute a risk of
This player can play back DVD VIDEO discs
electric shock to persons.
whose region code numbers include "1."
The exclamation point within an equilateral
Examples of playable DVD VIDEO discs:
triangle is intended to alert the user to the
presence of important operating and
1
2
1
2 3
ALL
1
1
5
maintenance (servicing) instructions in the
4
5 6
3
4
literature accompanying the appliance.
The player's region code is printed on the rear of
WARNING: TO REDUCE THE RISK OF FIRE OR
the player
ELECTRIC SHOCK, DO NOT EXPOSE THIS
Note of Color system format
APPLIANCE TO RAIN OR MOISTURE.
This player accommodates the NTSC system, and
For U.S.A.
also can play back discs recorded with PAL
This equipment has been tested and found to comply
system. (PAL video signals are converted to an
with the limits for a Class B digital device, pursuant to
NTSC signal and output.)
part 15 of the FCC Rules.
Supplied accessories
These limits are designed to provide reasonable
If anything is missing, consult your dealer
protection against harmful interference in a residential
immediately.
installation. This equipment generates, uses and can
• Audio/video cable (Yellow/White/Red) (x 1)
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
• Remote control (x 1)
cause harmful interference to radio communications.
• R6(SUM-3)/AA(15F) battery (x 2)
However, there is no guarantee that interference will
• Manufactured under license from Dolby
not occur in a particular installation. If this equipment
Laboratories. "Dolby" and the double-D symbol are
does cause harmful interference to radio or television
trademarks of Dolby Laboratories.
reception, which can be determined by turning the
• "DTS" and "DTS Digital Out" are trademarks of
equipment off and on, the user is encouraged to try to
Digital Theater Systems, Inc.
correct the interference by one or more of the
• This product incorporates copyright protection
following measures:
technology that is protected by U.S. patents and
Reorient or relocate the receiving antenna.
other intellectual property rights. Use of this
Increase the separation between the equipment and
copyright protection technology must be authorized
receiver. Connect the equipment into an outlet on a
by Macrovision, and is intended for home and other
circuit different from that to which the receiver is
limited viewing uses only unless otherwise
connected.
authorized by Macrovision. Reverse engineering or
Consult the dealer or an experienced radio/TV
disassembly is prohibited.
technician for help.
For Canada
For customer use
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
Enter below the Model No. and Serial No. which are
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
located either on the rear, bottom or side of the cabinet.
INSERT
Retain this information for future reference.
Model No.
For Canada
Serial No.:
THIS DIGITAL APPARATUS DOES NOT EXCEED THE
CLASS B LIMITS FOR RADIO NOISE EMISSIONS
FORM DIGITAL APPARATUS AS SET OUT IN THE
INTERFERENCE-CAUSING EQUIPMENT STANDARD
ENTITLED "DIGITAL APPARATUS," ICES-003 OF
THE DEPARTMENT OF COMMUNICATIONS.
1
Basic Operations
Insert a disc
Press 0 to open the disc tray.
1
2
Place a disc in the disc tray.
Turning on and off the player
• To insert an 8-cm disc, place it in the inner
recess.
Press 0 to close the disc tray.
3
With the label side up
Point toward the remote sensor directly as possible
(the operating range is approx. 5 m.)
About On-screen guide icons
: Playback.
: Pause.
Main display
/
: Slow-motion playback with the current
• Each indicator lights up when corresponding
speed.
function/mode is activated, or corresponding
/
: Fast forward/backward playback with the
information is on the main display.
current speed.
: At the beginning of a scene containing multi-
angle views.
: At the beginning of a scene containing multi-
audio sounds.
: At the beginning of a scene containing multi-
subtitles.
You can change the setting so that the on-screen
guide icons do not appear on the TV screen. (See
"ON SCREEN GUIDE" in "Initial settings.")
5
CAUTION
Notes on installation
To reduce the risk of electrical shocks, fire, etc.:
• Select a place which is level, dry and neither too hot
1. Do not remove screws, covers or cabinet.
nor too cold between 5˚C and 35˚C (41˚F and 95˚F).
2. Do not expose this appliance to rain or moisture.
• Leave sufficient distance between the player and the TV.
• Do not install the player in a place subject to vibrations.
Caution ––
STANDBY/ON button!
• Do not put heavy objects on the player.
Disconnect the mains plug to shut the power off
To prevent malfunction of the player
completely. The
STANDBY/ON button in any
• There are no user-serviceable parts inside. If
position does not disconnect the mains line. The power
anything goes wrong, unplug the power cord and
can be remote controlled.
consult your dealer.
with
arrowhead
CAUTION
• Do not insert any metallic objects, such as wires,
hairpins, coins, etc. into the player.
THIS PRODUCT USES A LASER SYSTEM.
• Do not block the vents. Blocking the vents may
USE OF CONTROLS OR ADJUSTMENTS OR
damage the player.
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
To clean the cabinet
RADIATION EXPOSURE.
• Use a soft cloth. Follow the relevant instructions on
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
the use of chemically-coated cloths.
REFER SERVICING TO QUALIFIED PERSONNEL.
• Do not use benzene, thinner or other organic solvents
and disinfectants. These may cause deformation or
CLASS 1 LASER PRODUCT
discoloring.
REPRODUCTION OF LABELS
WARNING LABEL INSIDE OF THE UNIT
Playable discs
• DVD VIDEO, Audio CD, Video CD, SVCD
V I D E O
CAUTION:
• DVD-R/-RW written in the DVD VIDEO format
• Do not block the ventilation openings or holes. (If the
• CD-R/RW written in the SVCD, Video CD or Audio CD forma t
ventilation openings or holes are blocked by a newspaper
• CD-R/RW written in MP3/JPEG in accordance with
or cloth, etc., the heat may not be able to get out.)
the "ISO 9660" format
• Do not place any naked flame sources, such as
lighted candles, on the apparatus.
Supported Digital audio formats:
• When discarding batteries, environmental problems
Linear PCM, Dolby Digital, DTS (Digital Theater Systems)*
must be considered and local rules or laws governing
NOTES
the disposal of these batteries must be followed strictly.
• If a disc gets dirty, scratched or warped, or due to the
• Do not expose this apparatus to rain, moisture, dripping
disc characteristics or recording conditions, the
or splashing and that no objects filled with liquids, such
player may not be able to play back such discs.
as vases, shall be placed on the apparatus.
• The player can play back audio signals recorded in
Precautions
MIX-MODE CD, CD-G, CD-EXTRA and CD TEXT.
• With some discs, operations may not be possible.
Notes on the power cord
* To play back DTS-encoded DVD VIDEO or DTS-
• When you are away on travel or otherwise for an extended
encoded Audio CD discs correctly, connect the
period of time, remove the plug from the wall outlet. A
player to an amplifier with a built-in DTS decoder.
small amount of power (1.0 W) is always consumed while
Otherwise, playback sound will be distorted.
the power cord is connected to the wall outlet.
• When unplugging the player from the wall outlet,
Unplayable discs
always pull the plug, not the power cord.
If you try to play back discs listed below, noise may be
• Do not handle the power cord with wet hands!
generated and causes damage to speakers.
• DVD-RW written in the VR format
• Disconnect the power cord before cleaning the
• DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM,
player or moving the player.
PHOTO CD, SACD
• Do not alter, twist or pull the power cord, or put
• Unfinalized discs
anything heavy on it, which may cause fire, electric
shock, or other accidents.
• Discs of irregular shape or discs with tape, seals or
• If the cord is damaged, consult a dealer and have the
paste on either the label side or playback side.
power cord replaced with a new one.
Playing back these discs may damage the player.
Avoid moisture, water, dust, and high temperatures
• Do not place the player in moist or dusty places.
The Non-DVD side of a "DualDisc" does not comply with
• If water gets inside the player, turn off the power and remove
the "Compact Disc Digital Audio" standard.
the plug from the wall outlet, then consult your dealer. Using
Therefore, the use of Non-DVD side of a DualDisc on
the player in this state may cause a fire or electrical shock.
this product may not be recommended.
• Do not expose the player to direct sunlight or place it
near a heating device.
2
Turning on and off the player
Open/close the disc tray
STANDBY/ON
OPEN/
CLOSE
Basic playback
– SLOW
+
DISPLAY ON SCREEN
Buttons To do
3*
Start/resume normal Playback
7
Stop
ENTER
• When RESUME is ON or DISC
RESUME, this player memorizes
the position on the disc where
PREVIOUS
SELECT
NEXT
you interrupted playback.
– To resume playback, press 3.
CLEAR
– To stop playback completely,
press 7 again.
1
2
3
8*
Pause
4
5
6
• Each time you press 8 on the
remote control, the still picture
7
8
9
CANCEL
RETURN
advances to the next frame.
0
¡/1 Fast forward/backward
TITLE/
SOUND
GROUP
EFFECT
VFP
DIMMER
(While paused)
I/P
Slow-motion playback
ANGLE
SUBTITLE
AUDIO
ZOOM
• Each time you press the button,
the playback speed changes.
SLIDE EFFECT
¢/4 Skip chapter/track
• If you press and hold the button
during playback, playback is
advanced/reversed at 5 times
normal speed.
VARI-PLAY
(For DVD Video)
(variable
The disc is played back at about
7 For DVD
playback)
1.2 or 1.5 times (FAST)/0.8 or 0.6
times (SLOW) normal speed.
1
Press TOP MENU or MENU to show the disc menu.
The sound is not muted, and the
2
Press 5/∞/2/3 to select a desired item, then press
ENTER or 3 (SELECT).
subtitle does not go off (except for
DTS).
• With some discs, you can also select items by entering the
number using the numeric buttons.
(For SVCD/VCD)
7 For SVCD/VCD
The disc is played back at about 2
times (FAST)/0.5 times (SLOW)
While stopped, press TOP MENU or 3 (SELECT) to
1
normal speed.
show the menu.
2
(Only for DVD Video)
Press the numeric buttons to select a desired item.
To select 5: press 5.
The playback position moves back
To select 23: press 2, then 3.
10 seconds before the current
To select 40: press 4, then 0.
position (only within the same title).
• To move to the next or previous page of the current menu,
* 38 on the player starts/pauses playback.
press ¢ or 4.
• To return to the previous menu, press RETURN.
To play back without PBC
While stopped, press the numeric buttons instead of 3
(SELECT) to start playback.
Changing the display brightness
To reactivate PBC
Press DIMMER to change the brightness of
• Press TOP MENU or MENU.
the display window.
• Press 7 to stop playback, then 3 (SELECT).
6
Connections
Before making connections:
• Do not connect the AC power cord until all other connections have been made.
• Connect VIDEO OUT of the player directly to the video input of your TV. Connecting VIDEO OUT of the
player to a TV via a VCR/an integrated TV/Video system may cause a monitor problem.
Basic Connection
S-video cable*
TV
(not supplied)
IN
S- VI
DE O
The player
PC M
/S TR
CO AX
EA M
IAL
P
Y
R
Yellow
DI GI
TA L
OU T
S-V IDE
O
VID EO
Audio/video
VI DE
O OU
B
P
T
cable*
(supplied)
White
Red
Connecting to a TV with component jacks
P
B
COAXIAL
Y
RIGHT
/STREAM
LEFT
S-VIDEO
VIDEO
P
R
AUDIO OUT
TAL OUT
VIDEO OUT
To component video input
To switch the scanning mode between Progressive and
Interlace, press and hold VFP-I/P on the remote control
for a few seconds.
NOTES
• Connect "Y" to "Y,""P
B
" to "P
B
(C
B
),""P
R
" to "P
R
correctly.
• When using component (Y, P
B
, P
R
) jacks, do not
connect S-VIDEO jack with the player.
About the scanning mode indicator
[PICTURE SOURCE] of
Source type of DVD VIDEO
the PICTURE menu
Film source
Video source
AUTO
[DDP]
[P]
FILM
[DDP]
[DDP]
VIDEO(NORMAL)/
[P]
[P]
(ACTIVE)
NOTE
Some progressive TV and High-Definition TV sets are
not fully compatible with the player. To check the
compatibility of your TV, contact your local JVC
customer service center.
Advanced Operations
Changing the display window
Changing the language, sound
contents
and scene angle
Each time you press DISPLAY,
OPEN/
1
Press the button.
CLOSE
the display window contents
2
Press the button repeatedly or
changes.
5/∞ to select the desired item.
3
Press ENTER to finish the
Locating the beginning of a scene
setting.
or song
Buttons
To do
You can select a title/chapter/
AUDIO
For DVD Video:
track directly and start playback.
select audio languages.
For DVD Video:
For SVCD/VCD:
PREVIOUS
(While stopped) select title.
select the audio
(While playing back) select
channel.
chapter.
SUBTITLE
select the subtitle.
For SVCD/VCD/CD:
Select track.
ANGLE
select the view-angle.
To select 5: press 5.
To select 23: press 2, then 3.
To select 40: press 4, then 0.
Changing the Sound Field
• If you press TITLE/GROUP
Each time you press SOUND
before entering the number, you
TITLE/
GROUP
EFFECT, the Sound Effect mode
can select the title instead of the
changes.
chapter.
ANGLE
• As the value becomes bigger, the
SLIDE EFFECT
Sound Effect works stronger.
Using the disc menu
You can operate a disc—SVCD/
VCD with Playback Control*
(PBC)—using the disc menu
shown on the TV screen.
Zooming the picture
* A method of controlling disc play
for SVCD/VCD by using the disc
To adjust the picture tone
Each time you press ZOOM, the
menu.
magnification changes.
1
Select "USER1" or "USER2."
• You can use 5/∞/2/3 button to
Press 5/∞ to select a parameter, then press ENTER.
2
move the zoomed position.
GAMMA
To return to the normal playback,
select the normal size by pressing
ZOOM repeatedly.
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY
3
Press 5/∞ to adjust the parameter, then press ENTER.
4
Repeat step 2 and 3 to adjust other parameters.
5
Press VFP-I/P to finish the setting.
Turning on the power
Inserting the AC power plug
After all other connections have been made, insert the
AC power plug to the wall outlet firmly.
Installing the batteries in the remote control
Open the compartment cover, and place the two
NOTES
supplied R6(SUM-3)/AA(15F) batteries in the remote
• If your TV has a monaural audio input
control according to the polarity markings ("+" and "–")
instead of stereo, use an optional audio
inside the compartment. Then replace the cover.
cable which converts stereo audio output to
V ID
E O
monaural.
• If your TV is a HDTV or HD-ready TV, you can
LE FT
connect with component (Y, P
B
, P
R
) jacks. By
A U D
IO
connecting with component (Y, P
, P
) jacks,
RI GH
B
R
T
you can select the progressive scanning
mode which provides the best picture quality.
* The S-VIDEO jack and component (Y, P
,
B
P
) jacks cannot be used at the same time.
R
When using the S-VIDEO jack, do not
connect the component (Y, P
, P
) jacks
B
R
with the player.
RIG
HT
LE FT
AU DI
O OU
T
The batteries will last about six months with normal use.
If the functions of the remote control become erratic,
Connecting to a stereo audio amplifier (receiver)
replace the batteries.
P
B
Y
RIGHT
Precautions of the safe use of batteries
LEFT
Observe the following precautions for the safe use of
EO
VIDEO
P
R
batteries. If they are used improperly their lives will be
VIDEO OUT
AUDIO OUT
shortened, they may burst or their contents may leak.
To analog audio input
• Remove the batteries from the remote control if it is
Connecting to a digital audio device
not going to be used for a long period of time.
To enjoy high-quality surround sound, connect the
• Remove dead batteries and dispose of them
DIGITAL OUT (COAXIAL) jack to a Dolby Digital or DTS
properly.
decoder or an amplifier with a built-in decoder.
• Never leave dead batteries lying around, take them
apart, mix them with other refuse, or throw them into
P
B
Y
RIGHT
COAXIAL
an incinerator.
PCM/STREAM
• Never touch liquid that has leaked out of a battery.
(C
R
)"
LEFT
S-VIDEO
VIDEO
P
R
• Do not mix new and old batteries, or batteries of
DIGITAL OUT
VIDEO OUT
AUDIO OUT
different types, when placing them.
To analog
audio input
Turning on and off the player
Press
STANDBY/ON.
To digital audio input
NOTES
• Depending on the disc, no signal may be outputted
from the DIGITAL OUT. Make an analog connection
in this case.
• Set [DIGITAL AUDIO OUTPUT] in the [AUDIO]
preference display correctly according to the
connected digital audio equipment. (See "DIGITAL
AUDIO OUTPUT" in "Initial settings.")
3
Menu bar functions
You can use various functions from the menu bar.
Changing the picture tone (VFP)
To bring up the menu bar
The VFP (Video Fine Processor)
STANDBY/ON
When a disc is inserted, press ON SCREEN twice.
function allows you to adjust the
A menu bar for the type of disc inserted will appear
picture character according to the
+
under the status bar.
– SLOW
DISPLAY ON SCREEN
type of programming, picture tone or
personal preferences.
Ex.: Menu bar for DVD VIDEO
1
Press VFP-I/P.
Press 2/3 to select the desired
2
ENTER
preset.
Selected
To dismiss the menu bar and the status bar, press ON
USER 1
Preset
SELECT
NEXT
SCREEN.
GAMMA
MID
Basic operation procedure
BRIGHTNESS
+ 4
CLEAR
CONTRAST
+10
Press 2/3 to select the icon you want to work with.
1
SATURATION
+10
1
2
3
2
Press ENTER.
+10
TINT
After pressing ENTER:
4
5
6
SHARPNESS
LOW
(1) When a pull-down menu appears, press 5/∞ to
Y DELAY
+ 2
7
8
9
select the setting you want, then press ENTER.
CANCEL
RETURN
Parameter
(2) When a number-entry box appears, use the
0
numeric buttons to enter the number you want,
NORMAL For watching TV in a
SOUND
then press ENTER.
EFFECT
VFP
DIMMER
general room.
I/P
(3) When changing
CINEMA
For watching a movie
SUBTITLE
AUDIO
ZOOM
software in a room with
repeatedly to select the setting you want.
suppressed light.
NOTES
• The selected item on the menu bar is shown in green.
USER1
You can adjust
• The available functions differ depending on the
USER2
parameters that affect the
player status. Refer to the explanation below to check
picture character and
when you can use a certain function.
store the settings as a user
preset. See below.
Menu bar functions
selects the time mode shown in the display
window and the status bar.
• TOTAL: Elapsed time of current title (DVD) or a disc
(CD/VCD/SVCD)
Adjust this if the neutral color is bright or dark.
• T.REM: Remaining time of current title (DVD) or a disc
The brightness of dark and bright portion is
(CD/VCD/SVCD)
maintained (LOW/MID/HIGH).
(Except for DVD: while stopped, disc total
time)
Adjust this if the picture is bright or dark on the
• TIME: Elapsed time of current chapter (DVD) or
whole (–16 (darkest) to +16 (brightest)).
track (CD/VCD/SVCD)
Adjust this if the far and near position is unnatural
• REM:
Remaining time of current chapter (DVD) or
(–12 to +12).
track (CD/VCD/SVCD)
(while stopped, current track total time)
Adjust this if the picture is whitish or blackish
(–16 (blackest) to +16 (whitest)).
selects repeat mode.
Adjust this if the appearance of flesh tone is
DVD:
During playback
unnatural (–16 to +16).
CD:
In any condition
VCD/SVCD: In any condition except PBC playback
Adjust this if the picture is indistinct (LOW/HIGH).
• CHAPTER: Current chapter repeat (DVD)
• TITLE:
Current title repeat (DVD)
Adjust this if the picture looks separately/
• TRACK:
Current track repeat (CD/VCD/SVCD)
overlapped (–2 to +2).
• ALL:
All track repeat (CD/VCD/SVCD)
• A-B:
A-B repeat (During playback). After
selecting A-B, press ENTER at the
beginning point of repeat, then press
ENTER again at the end point.
7
Initial setup
When you turn on the player for the first time after
purchase, the following message appears on the TV
screen.
EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO
SETTING
YES - PRESS ENTER NO - PRESS CANCEL
Before enjoying this player, make the initial settings as
follows:
1
Press ENTER.
DVD PLAYER SETUP
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
ON SCREEN LANGUAGE
ENGLISH
ENGLISH
FRENCH
SPANISH
Press 5/∞ to select the on-screen language for
2
the preference displays, etc., then press ENTER.
DVD PLAYER SETUP
MONITOR TYPE
4:3 L.B.
16:9
PICTURE SOURCE
4:3 LB
AUTO
4:3 PS
SCREEN SAVER
ON
BACKGROUND
STANDARD
3
Press 5/∞ to select the monitor type, then press
ENTER.
• For a normal (conventional) TV, select "4:3 LB" or
"4:3 PS." (See "MONITOR TYPE" in "Initial
settings.")
• For a wide-screen TV, select "16:9."
DVD PLAYER SETUP
DIGITAL AUDIO OUTPUT
DOLBY DIGITAL/PCM
PCM ONLY
ANALOG DOWNMIX
DOLBY PROLOGIC
DOLBY DIGITAL/PCM
D.RANGE CONTROL
STREAM/PCM
ON
OUTPUT LEVEL
STANDARD
4
Press 5/∞ to select a desired digital output
signal type, then press ENTER.
Set this item correctly according to the logo on your
receiver or decoder.
(If you do not connect the player to such a device,
press ENTER to finish the setting.)
• Receiver/decoder bearing Dolby Digital logo and
no DTS, select "DOLBY DIGITAL/PCM."
• Receiver/decoder bearing both Dolby Digital and
DTS logos, select "STREAM/PCM."
• Receiver/decoder bearing neither Dolby Digital nor
DTS logo, or digital recorder, select "PCM ONLY."
To bring up the DVD PLAYER SETUP display later
Press SET UP for a few seconds until the DVD PLAYER
SETUP display appears.
4
• OFF:
Repeat mode deactivated. Select this to
quit repeat mode.
specifies beginning point of a title (DVD) or a
disc (CD/VCD/SVCD) by the time.
DVD:
In any condition
CD:
In any condition except program or
random playback
VCD/SVCD: In any condition except PBC or program
or random playback
specifies a chapter to play back from
(DVD only).
selects the audio language (DVD), sound
track (DVD), or audio channel (VCD/SVCD) during
playback.
selects the subtitle language (DVD) or
subtitle (SVCD) during playback.
selects a desired scene angle in a multi-
angle part (DVD only).
setting, press ENTER
specifies the playback order of tracks while
stopped (unavailable for DVD). You can program up to
99 tracks.
1. After selecting
icon, press the numeric
buttons to specify tracks in the desired order.
• To correct the program, press 5/∞ to move
to
the track to be corrected, then press CANCEL. The
track is erased and the subsequent programmed
tracks move up.
Pressing 7 clears all the programmed tracks.
2. Press 3(SELECT) to start program playback.
• During program playback, you cannot edit the
program contents.
• To exit the program mode, press ON SCREEN after
clearing the program.
activates random playback while stopped
(unavailable for DVD).
After selecting
icon, press ENTER.
The player starts random playback.
8

Advertisement

loading

  Also See for JVC XV-N320B

  Related Manuals for JVC XV-N320B

  Summary of Contents for JVC XV-N320B

  • Page 1 “Compact Disc Digital Audio” standard. not fully compatible with the player. To check the Therefore, the use of Non-DVD side of a DualDisc on compatibility of your TV, contact your local JVC this product may not be recommended. customer service center.
  • Page 2 ON SCREEN GUIDE Activate or deactivate the on-screen guide. You can use your favorite image as the opening display. [STANDARD]: Display the JVC original image. AUTO STANDBY Set the time until the player turns off (into standby) automatically if playback is [USER]: Display your favorite image as the opening display when a JPEG image is stopped for more than 30 minutes or 60 minutes.

This manual is also suitable for:

Xv-n320bebXv-n320bagXv-n320beeXv-n320begXv-n320benXv-n320beu ... Show all