JVC XV-D701BKB Instructions Manual page 66

Setting and adjustment
For the speaker(s) whose size is set
to "None", Speaker level and Delay
cannot be set ("——" appears in the
setting field).
However, when playing back a
Dolby Digital disc, LFE singal is
output from SUBWOOFER output
even if S. WOOFER shows "——",
allowing to activate a sub-woofer
connected. In such case, adjust the
output level using the level control
on the sub-woofer.
Delay of S.WOOFER cannot be set.
62
3 Speaker level (available only when selecting EXPERT)
You can adjust the output level of each
speaker.
1 Select [LEVEL] using
The color of "LEVEL" changes.
2 Select the desired speaker(s) to be set
using .
• F.SP: front speakers. the level
is fixed to 0db.
• C.SP: center speaker
• R.SP: rear speakers
• S.WOOFER: sub-woofer
The setting range is -6 db to +6 db in 1 db units.
3 Set the level using
4 Delay (available only when selecting EXPERT)
You can adjust the delay time of each
speakers.
1 Select [DELAY] using
The color of "DELAY" changes.
2 Select the desired speaker(s) to be set
using .
• F.SP: front speakers. the delay is fixed
to 0ms.
• C.SP: center speaker (selectable from 0 to -5 mS in 1 mS units)
• R.SP: rear speakers (selectable from 0 mS, -5mS, -10 mS, and -15 mS)
3 Set the delay time using
NOTES
¶
To exit the speaker level (or delay) setting mode
Move to [LEVEL] (or [DELAY]) in the on-screen display and press
until [LEVEL] (or [DELAY]) returns to its original color.
, then press .
ENTER
.
, then press .
ENTER
.
PREFERENCE1 PREFERENCE2
SPK.SETTING
EXPERT
LEVEL
DELAY
F. SP 0db
C. SP 0db
R. SP 0db
S.WOOFER 0db
PRESS KEY
TEST TONE
PREFERENCE1 PREFERENCE2 SPK.SETTING
EXPERT
LEVEL
DELAY
F. SP 0mS
C. SP 0mS
R. SP 0mS
S.WOOFER 0mS
PRESS KEY
TEST TONE
ENTER