DuroStar DUAL FUEL DS12000EH User Manual page 23

5.
Install outside wheel washers
a. Place the other large washers onto the axles.
6.
Install cotter pins
a. Place the cotter pin through the hole at the end of
the axle and bend it out to secure the wheel.
7.
Install handles
a. Attach the handles to the brackets on the frame
using the provided bolts and nuts.
CAUTION: Do not over-tighten the handles, it
will prevent free movement.
8.
Flip over assembled
a. Flip the assembled generator over onto its wheels
and support brackets.
23