Remove Shipping Braces - DuroStar DUAL FUEL DS12000EH User Manual

GENERATOR SETUP
Step 1 - Remove Shipping Braces
1.
Unpack
a. Remove the generator from the box.
b. Place the largest piece of packing foam on a flat surface.
c. Flip the generator upside down on the pad.
CAUTION: NEVER attempt this if you have put
fuel or oil in the generator.
2.
Remove braces
a. The shipping braces prevent engine movement
during shipment. Flip the generator over and
remove the brightly colored braces between the
motor and the frame, and the wood brace under
the generator.
Note: Shipping braces can be thrown
away, they will not be needed again.
21