Index For user Metal and Water Finder Index page 1 Important Nots page 2 Technical page 3 Device Parts page 5 Main Unit page 6 Main Unit Setup page 7 Search System page 11 Charging page 18 Notes page 19 page|1...
INSPECTOR 900-PLUS Important Nots Safety information It’s better to turn off mobile The operating in high voltage while using the device. areas would limit the results and performance Don't operate two devices with Don't store in high temperature or same method of search at the...
Page 4
INSPECTOR 900-PLUS Search for precious metals Under ground. Detect for: Long Range Locator System, the system detects the energy levels Detection System: Operating processor: MICROCONTLLER PIC18 & ARM 7 Processing procedures: LRL treatment for energy levels formed around the target's...
Page 5
INSPECTOR 900-PLUS Operating temperature: From °15 C to °60 C Storing temperature: From °15 C to °40 C Humidity: It can be stored and operated at the average air humidity level of %5 to %80. Device weight 1.25 KG with the case Device dimensions 19 x 12 x 5.5 cm...
INSPECTOR 900-PLUS Device Parts Main unit It is the unit responsible for leading the research and processing the data extracted from the ground and displaying it on the screen using the latest and most advanced interactive programs and systems. Transceiver antennas Two antennas to send and receive the waves returned from the target as a result of the transmitted waves of high sensitivity.
Main Unit INSPECTOR 900-PLUS Main unit Connect the antennas to their respective On and off button places on the front of the device as Laser button to determine the direction shown in the drawing. of the target with high accuracy...
Page 8
INSPECTOR 900-PLUS Device Set up Set up and work on the device To turn on the device, press the Power key located on the left side of the device, and the boot screen shown in the attached image will appear.
Page 9
INSPECTOR 900-PLUS Device Set up The main interface contains two search icons to enter the search system and start searching and settings to adjust the device settings in addition to an indicator indicating the level of battery charge present in all interfaces, the transition between...
Page 10
INSPECTOR 900-PLUS Device Set up Brightness Adjustment: When selecting on the brightness icon, the screen brightness value is changed by pressing the OK button to change the brightness value according to ten levels of brightness from %100 to %10 %10 to %100...
INSPECTOR 900-PLUS Device Set up To return to the settings interface, press the back button. main menu search settings When selecting the search icon and pressing the OK button, search system interface appears where it is moved to specify the search parameters using the...
Page 12
INSPECTOR 900-PLUS Start up How the search system works search Starting GOLD target 100m DISTANCE DEPTH How to work in the search system When we click on start search, the search interface When we press start search, the search interface appears, which contains search options...
Page 13
INSPECTOR 900-PLUS This system works on the technology of transmitting and receiving integrated with radar sensing, it sends and receives waves at the same time, it searches for the target according to its types by sending a signal with a frequency corresponding to the...
Page 14
INSPECTOR 900-PLUS Start up Start search in the site Start search in the site The user must carry the device through the Grip so that the device is horizontal with the ground and slightly tilted towards the soil as shown in the drawing.
Page 15
Start up INSPECTOR 900-PLUS In the case of the presence of the target for which the search was determined, the device will receive a reading and a signal by changing the path of the device automatically from the normal path on which it was stable to another path, this direction is the direction of the location of the target.
Page 16
INSPECTOR 900-PLUS Start up How to locate the target First, the user should point the scanning antennas slightly down to the ground After confirming more than one reading of the direction of the target’s presence, we press the OK button to calibrate and then move in a straight line towards the target until we reach a point where it exceeds the target’s location, and we will notice that the device has changed its direction automatically...
Page 17
INSPECTOR 900-PLUS Start up There is another way in order to be able to determine the target's location more accurately, we do the process of squaring the target location by taking readings of the target point from four corners in a square shape from a distance of three meters from the target site, we will notice the intersection point of the direction of the four readings theoretically, it will be the midpoint of the target.
Page 18
INSPECTOR 900-PLUS Start up - Second method of depth determination: After con rming the point of the target, we reduce the search distance to the lowest level and maintain the depth of the search to the highest level and complete the steps of work, and stand in...
Page 19
INSPECTOR 900-PLUS Start up When drilling begins, we remove the transmitting and receiving antennas, remove the handle, keep the radar sensor installed in the main unit, carry the device and use it as a point veri cation unit, where we direct the device towards the target directly during drilling and press the OK button for calibration.
INSPECTOR 900-PLUS Charging We note the conditions of the battery during work as it expresses how full the battery charge is in order from full to empty as shown in the drawing. Battery full Battery low You must recharge the battery...
Need help?
Do you have a question about the Inspector 900-Plus and is the answer not in the manual?
Questions and answers