Important Notes User’s Manual The operating in high voltage areas would The cell signal interferes with the device limit the results and performance signal, so turn off the cell while operating Don't operate two devices with same Don't store in high temperature or high method of search at the same place humidity Disconnect the batteries before long...
Overview MF 1100 A This Metal-Finder electronic device works on the transceiver technology,It sends waves and receives them simultaneously,It detects metals by sensing their frequencies,Every Metal has its unique frequency ,depending on its physical structure and chemical reaction, when the metals are underground they will be affected by the earth's electromagnetic fields, these metals are affected by the soil electrostatic fields that absorbed from different sources like power stations,radio and tv transmitting stations, satellites, lightning and so others electrostatic and power generators.
Page 5
, Therefore the user could select the specified search distance and depth easily and precisely up to 90 %. This technology works for the first time now with MWF Products . Search Operation:...
Main Unit MF 1100 A Front View Scanning Antennas plugs Navigation And selecting Button (Move) Display Confirm And Enter (Enter) Power Switch Escape And Restart Button ( ESC ) Page...
Page 7
Main Unit MF 1100 A Back View Primary Battery Cover Grip Socket Secondary Battery Cover Secondary Battery Power Switch Page...
Parts MF 1100 A Transceiver Antennas Transmitting Antennas In Both Ends Receiving Antennas In The Middle Grip Plug The Grip And Secure It In Place To Carry And Navigate The Device Easily With The Rotaion Ability Ground Transmitter Unit Connect this unit to the device and plant it to the ground before heading towards target.
Assembly MF 1100 A Connect the antennas to the plugs in the front (figure 1) Connect the grip to the socket in the bottom of the device (figure2]0) Connect the power supply which is 9v battery in the battery housing (figure 3) Don't mix Different volts and types of batteries Page...
Setup MF 1100 A Pull the left and right antennas to the limit. Switch the secondary batter switch on. Turn the device on By the ON/OFF Switch. After the boot screen the language list would appear the user must specify the system language by navigating to the chosen language pressing (MOVE) then selecting the language pressing (ENTER) Then the Main Menu would appear:...
Page 11
Setup MF 1100 A 1st Step Select the metal type by navigating to metal type on screen pressing(MOVE) then selecting by pressing (ENTER) then a list with the searchable metal types would appears on the screen,which is Gold, silver, Bronze diamond and raw gold navigate to the desired metal pressing (MOVE) Then (select By pressing (ENTER Select Metal Gold...
Page 12
Setup MF 1100 A After Confirming the distance, the screen will automatically return to the Main Menu Metal Type Search Distance Search Depth 3rd Step in order to start the search the last setting must be configured ,which is the search depth, by pressing (MOVE).
Getting Started MF 1100 A In the meantime, the user must move the device towards the soil to be automatically configure the soil as shown in the figure below Soil Until the configured options menu appears as shown in the figure below Metal: Gold distance 100 500 1000 1500...
Page 14
Getting Started MF 1100 A Ground Transmitter Use this unit in the rocky and mountain areas to facilitate the waves distribution faster and more precise,after the assembly and the setup connect it to one of the middle antennas plugs and plant it to the ground for a period of 2-1 minutes then disconnect it and reconnect the antenna and complete the search operation as explained This operation takes place after finishing the setup...
Page 15
Getting Started MF 1100 A The user must carry the device by grip horizontally slightly sloped towards ground as shown in the figure below Soil Then stimulate the device’s waves and output fields by moving the device right and left slowly then stop the device.
Page 16
Getting Started MF 1100 A In the case of a located target , the device will receive signal and a reading that will divert the device from the normal track to another track which is the target point track, then the device will steady at the same direction ,in the meantime rotate fully around the direction that the device went toward until reaching the opposite and notice the track change once more and go toward the target.
Page 17
Getting Started MF 1100 A How to Locate Target At first the user must bend the middle antennas towards the ground After ensuring multiple readings towards the target. start walking in the same direction holding the device normally . until you reach the passing point you will notice that the device rotates around the normal track towards the point.
Page 18
Getting Started MF 1100 A There is another way to locate the target point more accurately, (Square method) take different readings for the target from angles forming a square m from target point the intersection point of the for readings is the target point User Device Direction Device Direction...
Con rm Target MF 1100 A Filter Unit This unit is designed to ensure the validity of the target it filters all the interfering signals that might mix with the device signal especially in the rocky areas and mountains by absorbing the interfering signals the might appear like the desired metal frequency Operates on Disposable 9v Battery With a Power Switch Usage after locating the target and the digging point switch on the filter and plant it to the ground in a 20m...
Page 20
Con rm Target MF 1100 A Valid Operation Soil Real Target Invalid Operation Soil Natural Ore Page...
Need help?
Do you have a question about the MF-1100 A and is the answer not in the manual?
Questions and answers