Table of Contents
Advertisement
Cleaning and care
Preparing for the Self Clean program
The high temperatures used during
Self Clean will damage accessories
that are not designed for cleaning in
the Self Clean program.
Please remove these accessories
from the oven before starting the Self
Clean program. This also applies to
accessories purchased separately.
The following accessories are suitable
for cleaning in the Self Clean program
and can remain in the oven:
– Shelf runners
– Wire oven rack HBBR 30-2
Take all accessories out of the oven
that are not "Self Clean safe" out of
the oven.
Place the wire oven rack on the top
shelf level.
If not removed, coarse soiling can
smoke and cause the Self Clean
program to turn itself off.
Remove any coarse soiling before
running the Self Clean program.
78
Starting the Self Clean program
Risk of burns!
When Self Cleaning the front of the
oven becomes hotter than with
normal oven use.
Prevent children from touching the
oven during the Self Clean program.
Select
Maintenance
Select
Self Clean
The Self Clean level is highlighted.
Press
or
to toggle between levels
1, 2 and 3.
Select the level required.
Confirm with OK.
Follow the instructions in the display.
Confirm with OK.
Starting the Self Clean program
To start the Self Clean program
immediately, select
The Self Clean program will now start.
The door locks automatically. The oven
heating and the cooling fan will then
turn on automatically.
The oven light will not turn on during
the Self Clean program.
The remaining time for the Self Clean
program appears. The duration cannot
be changed.
You can use the timer while the Self
Clean program is running. At the end of
the timer duration the buzzer will sound
and will flash. The time will then
continue to increase in the display.
.
.
Start Now
.
Advertisement
Table of Contents
