Calling Up Information Messages; Calling Up Help Messages - Lenze EPM-H315 Operating Instructions Manual

Show/Hide Bookmarks
5.3
If you want to ...
call up an information message.
A)
•
Information messages called up for the first time Information messages called up for the first time
are marked by **.
select the previous or next information message.
B)
C) close the information message.
5.4
If you want to ...
A) call up a help message.
B) close a help message.
L

Calling up information messages

Information messages
l
– are texts which appear because of a certain event (e.g. if an actual value exceeds a limit),
– can only be called up as long as the triggering event is active.
– must have been programmed in the "HMI Designer" planning tool.
– can have a maximum length of 2 lines × 20 characters.
The second to last line contains a programmable message field. This field indicates the
l
numerical size of the variable that has activated the message.
Info
The LED in the key will flash if an information message is available.
l
k d b **

Calling up help messages

Help messages
l
– can be assigned to pages or information messages.
– contain useful notes to make handling easier.
– must have been programmed in the "HMI Designer" planning tool.
Help
The LED in the key will flash if a help message is available.
l
Press keys ...
Info
PgUp
or
Clr
Esc
Press keys ...
Help
Clr
Esc
EDBEPM-H315 DE/EN/FR 4.0
Operation
Example
Pressure exceeds Pressure exceeds Pressure exceeds
the safety limit the safety limit the safety limit
125.5 125.5 125.5 ** ** **
PgDN
Water level below the Water level below the Water level below the
working threshold working threshold working threshold
40 40 40
Example
1 2 3
4 5 6
7 8 9
0
53