Disconnecting From The Pc; Status Messages For The Keypad - Lenze EPM-H315 Operating Instructions Manual

Show/Hide Bookmarks
Commissioning
4.2.3

Disconnecting from the PC

Disconnecting from the PC
1. Switch off the PC.
2. Switch off the supply voltage for the keypad.
3. Remove the EPZ-H111 programming adapter from the keypad and the EPZ-H110 download cable from the
PC.
4. Switch on the supply voltage for the keypad.
4.3

Status messages for the keypad

You can always query the status of the keypad and get information about:
The serial interface
l
The name of the loaded driver
l
The version of the loaded driver
l
The network address of the keypad
l
The last error
l
If you want to ...
A) query the status of the keypad
B) select the next status page
C) close the status display.
48
The keypad is now ready for operation.
EDBEPM-H315 DE/EN/FR 4.0
Press keys ...
2x
shift
PgUp
PgDN
or
Clr
Esc
Example
Serial: NET Serial: NET Serial: NET
Driver: Can Lenze S Driver: Can Lenze S Driver: Can Lenze S
Ver. Ver. Ver. : 1.03 : 1.03 : 1.03
Up/ Down : next page Up/ Down : next page Up/ Down : next page
Addr. : FROM PRJ:010 Addr. : FROM PRJ:010 Addr. : FROM PRJ:010
Error : NO ERROR Error : NO ERROR Error : NO ERROR
Up/ Down : next page Up/ Down : next page Up/ Down : next page
L