Preface And General Information; About These Operating Instructions; Terminology Used; Scope Of Supply - Lenze EPM-H315 Operating Instructions Manual

Show/Hide Bookmarks
1
1.1
1.2
1.3
L

Preface and general information

The EPM-H310 keypad enables you to access codes of Lenze controllers, 9300 Servo PLCs and
Drive PLCs and to control them easily. Communication takes place via the system bus (CAN).
The HMI Designer is a powerful development environment for creating projects containing the
configuration of the keypad.

About these Operating Instructions

These Operating Instructions describe safe and trouble-free working on and with the EPM-H315
l
keypad.
All persons working on and with the EPM-H315 keypad must have these Operating Instructions
l
available and observe all relevant information and notes.
These Operating Instructions must always be kept as a complete document and in a readable
l
state.

Terminology used

Term In the following text used for
Drive controller Lenze 8200 and 8200 vector frequency inverters, 9300 servo inverters
HMI Human Machine Interface

Scope of supply

Scope of supply
•
1 EPM-H315 keypad
•
1 Operating Instructions
•
4 mounting clamps
•
4 screws M4 x 35 mm
•
1 seal
•
1 terminal strip, 4-pole, for connection of DC
voltage supply
•
1 terminal strip, 5-pole, for system bus (CAN)
connection
Preface and general information
Important
After receipt of the delivery, check immediately
whether the items delivered match the accompanying
papers. Lenze does not accept any liability for
deficiencies claimed subsequently.
Claim
•
•
EDBEPM-H315 DE/EN/FR 4.0
visible transport damage immediately to the
forwarder.
visible deficiencies/incompleteness immediately to
your Lenze representative.
33