Table of Contents
Advertisement
Using the Accessories
Condensation Tray (6)
The Condensation Tray should always be inserted
so that any dripping water can be collected in it.
Insert the tray right into the bottom of the Steam
Air Fryer.
Although condensation water should have cooled
down at this stage, as a precautionary measure,
use oven mits to remove and drain the water from
the tray.
•
Check the Condensation Tray halfway through
the cooking cycle to ensure it does not
overflow.
•
Empty the Condensation Tray and place it
firmly back into the bottom of the appliance.
Water Tank (1)
•
Remove the Water Tank from the top of the
appliance (Fig.1).
•
Turn the Water Tank over. Remove the cap on
the Water Tank by anti-clockwise (Fig.2). Fill
the Water Tank with water (Fig.3).
Fig.1
Fig.2
Fig.3
Note: The Water Tank holds 1 litre of
water.
•
Close and tighten the cap on the Water
Tank. Return the Water Tank to the top of the
appliance.
Note:
• Please cook with distilled or purified
water.
• Do not fill the tank with water
temperature higher than 50 degrees or
lower than 10 degrees, otherwise there
may be a risk of water leakage.
• After adding water, be sure to tighten
the water tanknuts. Otherwise there
may be a risk of water leakage.
• Do not water the top of the product
directly. Water may enter the interior
of the product.
Condensation Collector (9)
The Condensation Collector should always
be inserted so that any dripping water can be
collected in it. Slide the Condensation Collector
right into the bottom of air outlet openings (8) of
the Steam Air Fryer.
Although condensation water should have cooled
down at this stage, as a precautionary measure,
use oven mits to remove and drain the water from
condensation collector.
•
Check the Condensation Collector halfway
through the cooking cycle to ensure it does
not overflow.
•
Empty the Condensation Collector and
place it firmly back into the bottom of the air
outlet openings of the Steam Air Fryer.
Basket (3) & Rack (5)
Place the rack into the bottom of the basket,
then put ingredients into the basket and slide the
basket into the appliance.
After completion of a cooking session, remove
both the basket and rack from the appliance.
Clean both the basket and rack with non-
abrasive sponge or dish washing brush and warm
water.
Rinse thoroughly and dry completely before
positioning back into the appliance, remove
supply cord from power point and store appliance
ready for next cooking session.
Note:
• Do not fill beyond the basket, as it may
effect the quality of the fried food.
• Do not touch the external surface of
the basket during use or when
removed from appliance directly after
cooking, as it gets very hot. Only
hold the basket by the handle
protruding from the front of the
appliance.
10
Advertisement
Table of Contents
