4-3. UV Calibration
① Go to UV Calibration mode.
Screen is changed as below and you can a message about Paper as below.
There are two kinds of UV Setting Paper as below.
If you have OLD UV setting paper, select [Paper] OLD first and go to next step.
If you have NEW UV setting paper, select [Paper] NEW and go to next step.
When touch "PAPER" button, you can select OLD or NEW paper.
② Press "LS1" Key (or click "SETUP" icon) and enter UV Calibration Mode.
And OFFSET SETUP is started automatically.
Hitachi Terminal Solutions Korea Co., Ltd.
iH-110 Series Service Manual
OLD UV setting paper
NEW UV setting paper
50