Blaster’s Ranger II™ Power Adapter with AC power cord, or charged battery inserted in the camera. (The battery is fully charged when the Blaster’s Ranger II™ Camera is shipped from MREL.) Blaster’s Ranger II™ Lens Tripod Grip Ball Head 1.2 Camera Over view 1.2.1 Camera Front:...
Page 3
Arm Button Power ON/OFF Button 1.2.4 Camera Input Output Panel: USB OTG (Micro A/B connector) SDHC GigE Port (R J45 connector) Sync I/O, Trigger (Lemo connector) HDMI Port (Type A connector) DC Power In (Lemo connector) T: +1-613-545-0466 www.mrel.com contact@mrel.com...
1.2.5 Tripod This is an all aluminum Tripod with a 3/8” mounting screw. This Tripod is designed to support Grip Action Ball Head with the Blaster’s Ranger II™ attached. This is the only item that does not fit inside the Protective Carry Case.
Page 5
The Blaster’s Ranger II™ Camera will now enter Review Mode, unless it is set to AutoSave, in which case the Blaster’s Ranger II™ Camera will download the recording, then revert to Armed Mode. T: +1-613-545-0466 www.mrel.com contact@mrel.com...
Page 6
1.7 Review a Video in Image Memory Use the Playback icons to play forward, backward, or jump to points of interest in the movie. Use the Cut In Cut Out icons to select a portion of the movie to review or save. Skip Skip Back...
Blaster’s Ranger II™ Camera is powered off . Be sure to save important videos before initiating a new recording or turning off the Blaster’s Ranger II™ Camera. 2.1 Contacting MREL MREL Group of Companies Limited Blasting Instrumentation Team 5-779 Sir John A MacDonald Blvd.
Need help?
Do you have a question about the Blaster's Ranger II and is the answer not in the manual?
Questions and answers