Advertisement
1
B
A
A:
EXTEND TRIPOD LEGS.
B:
POSITION GRIP BALL HEAD.
4
SECURE THE MOUNTING ADAPTER ON TO THE BOTTOM OF
THE LENSE. ENSURE A TIGHT FIT.
7
CONNECT THE BLASTCAM™ INPUT CABLE TO
THE BACK OF THE BLASTCAM™
2
ROTATE GRIP BALL HEAD
UNTIL SECURE ON TRIPOD.
5
USING THE
MOUNTING
ADAPTER SECURE
THE CAMERA
AND LENSE TO
THE TRIPOD.
8
CONNECT ONE END OF THE ETHERNET
COMMUNICATION CABLE TO THE BACK OF
THE BLASTCAM™
QUICK START GUIDE
3
REMOVE THE LENS COVERS FROM BOTH THE CAMERA AND THE
LENS THEN ATTACH THE CAMERA LENS TO THE CAMERA AND
TWIST INTO PLACE.
A:
B:
9
CONNECT THE OTHER END OF THE
ETHERNET COMMUNICATION CABLE
TO THE BLASTCAM™ CONTROLLER
B
A
MOUNT THE BLASTCAM™
CONTROLLER MOUNT TO THE TRIPOD.
POSITION ON THE MOUNT THE
BLASTCAM™ CONTROLLER.
6
Advertisement
Table of Contents
Related Manuals for MREL BlastCam 2G Color
Summary of Contents for MREL BlastCam 2G Color
-
Page 1: Quick Start Guide
QUICK START GUIDE REMOVE THE LENS COVERS FROM BOTH THE CAMERA AND THE EXTEND TRIPOD LEGS. ROTATE GRIP BALL HEAD LENS THEN ATTACH THE CAMERA LENS TO THE CAMERA AND POSITION GRIP BALL HEAD. UNTIL SECURE ON TRIPOD. TWIST INTO PLACE. USING THE MOUNTING ADAPTER SECURE... - Page 2 CONNECT THE TRIGGER CABLE TO THE INPUT AC POWER: CONNECT THE POWER CABLE. PRESS THE TRIGGER BUTTON IF USING THE TRIGGER SWITCH OR CABLE ADAPTOR TO THE INPUT CABLE. (IF YOU DO NOT INTEND IN THE B LASTCAM™ CONTROLLER SOFTWARE, THE CLICK THE DC POWER: CONNECT THE DC TO USE THE IMAGEBLITZ...
Need help?
Do you have a question about the BlastCam 2G Color and is the answer not in the manual?
Questions and answers