Table of Contents
Advertisement
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
Each time you press the
button, the adjustable
items change as follows:
For KD-AR800/KD-G800:
BAL
FAD
(fader)
(balance)
VOL
(volume)
For KD-G700:
FAD
(fader)
VOL
(volume)
Indication
To do:
1
*
FAD
Adjust the front
and rear speaker
balance.
BAL
Adjust the left
and right speaker
balance.
LOUD
Boost low and
high frequencies
to produce a
well-balanced
sound at low
volume level.
*
2
WOOFER
Adjust the
(only for
subwoofer
KD-AR800/ output level.
KD-G800)
*
3
VOL
Adjust the
volume.
SOUND ADJUSTMENTS
LOUD
(loudness)
WOOFER
(subwoofer)
BAL
(balance)
LOUD
(loudness)
Range
R06 (Rear only)
|
F06 (Front only)
L06 (Left only)
|
R06 (Right only)
LOUD ON
|
LOUD OFF
00 (min.)
|
08 (max.)
00 (min.)
|
*
4
30 or 50 (max.)
1
*
If you are using a two-speaker system, set the fader
level to "00."
2
*
This takes effect only when a subwoofer is
connected.
3
*
Normally the control dial works as the volume
control. So you do not have to select "VOL" to
adjust the volume level.
4
*
Depending on the amplifier gain control setting.
(See page 30 for details.)
2
Adjust the setting.
Indication pattern changes as
you adjust the fader or balance.
Ex. 1: When you adjust "FAD" (fader)
Ex. 2: When you turn on the loudness
3
Repeat steps 1 and 2 to adjust the
other items.
To increase the level or
turn on the loudness
To decrease the level or
turn off the loudness
LOUD indicator
23
Advertisement
Table of Contents
