Table of Contents
Advertisement
HP module EVK hardware user guide – XM112, XB112
3.1
XB112 Breakout Board
The XB112 is Acconeer's breakout board and part of the Module EVK.
3.1.1
Overview
The XB112 is a breakout-board designed for the XM112 Radar Module. It makes the interfaces from
the XM112 radar module accessible for evaluation and debug. It also enables flashing of the XM112
via USB-UART or SWD. The XM112 is connected to the XB112 via a board-to-board connector on
the top side of the PCB. Below you will find pictures of both front and back side of the breakout
board.
Picture 1 shows the XB112 connector board, front side.
© 2018 by Acconeer – All rights reserved
,
LH112
Page 8 of 41
2022-08-25
Advertisement
Table of Contents
