Table of Contents
Advertisement
Safety Information
Be sure all power sources are turned off before checking the electric wiring or appliances to avoid electric
shock.
Do not run fan if cover or case is removed. This is to avoid electric shock.
All units are pressurized with dry air or nitrogen gas. All units must be evacuated before charging the
system with refrigerant. Keep finger away from moving parts.
Avoid touching refrigerant lines. Some parts are very hot and can cause burns.
Avoid contacting sharp edges or coil surface that are a potential injury hazard.
Avoid touching the units or electric box in wet hands to prevent electric shock.
Please call the specialized installation company or trained personnel when you installing, moving,
operating of the unit.
Field wiring must confirm to the requirements of units' electric specification.
Inspection
A person at the job site to receive material holds responsibility. Each shipment should be carefully
inspected against the bill of lading. The shipping receipt should not be signed before careful inspection.
Check carefully for concealed damage. Any shortage or damages should be reported to the delivering
carrier. Damaged material becomes the delivering carrier's responsibility, and should not be returned to
Turbo air unless prior approval is given. Check the serial tag information with invoice. Report any
discrepancies to Turbo air sales representatives.
3
Advertisement
Table of Contents
Troubleshooting
