Hamlet PASSWORD DISK USB 3.0 User Manual page 10

3.2 Read and Write data
Once you set the password encryption on the device, you must
unlock the hard disk in order to read and write data.
1. Connect Hamlet Password Disk to the computer with the
included USB cable. The red and green LEDs turn on.
2. To unlock the drive, input the password and press ENTER (#).
3. If the password is correct, the red LED switches off and the
blue turns on.
4. Now green and blue LEDs are both on and the drive is
unlocked. You can read and write data.
Disk
Status
Locked
Unlocked
RED GREEN
ON
–
LED Status
ORANGE
ON
ON
10
BLUE
– –
– ON