Table of Contents
Advertisement
Quick "How To" Guide
Turn Device On – Press and hold Device Button for at least 3 sec-
onds until light flashes blue 3 times indicating the device is ON.
Turn Device Off – Press and hold Device Button for at least 3 sec-
onds until light flashes red 3 times indicating the device is OFF.
Put Device into Pairing Mode – Press and hold Device Button for
at least 6 seconds until light flashes red & blue simultaneously,
indicating the device is in PAIRING MODE.
NOTICE: You have 30 Seconds to pair the device to the mobile
application before having to put the device into Pairing Mode
again.
Reset Device - Press and hold Device Button for at least 15 sec-
onds until light flashes red & blue then turns a solid color indicat-
ing the device has been reset.
WARNING: Resetting the device will delete all the data,
which cannot be recovered.
Low Battery - Light will flash red when device batteries are getting
below 10% of full charge.
NOTICE: Battery life is
also indicated on your
APP once paired.
Mounting Device to the Compressor
1.
Select a mounting location on the front platform of the air
compressor that is easily accessible, will not interfere with
any maintenance activities (changing pump oil, etc.), and will
not cover safety or data decals. Do not mount on the tank.
2.
Clean the selected mounting location on compressor very
well with the alcohol pad provided. If the location requires
more cleaning than the provided alcohol pad can do, use
denatured or isopropyl alcohol on a clean, lint-free cloth.
NOTICE: Do not use rubbing alcohol containing glycerin.
3.
Clean the back area of the Air Compressor Monitoring Device
where the Velcro will be placed with the alcohol pad provided.
If the location requires more cleaning than the provided alcohol
pad can do, use denatured or isopropyl alcohol on a clean, lint-
free cloth.
NOTICE: Do not use rubbing alcohol containing glycerin.
4.
Adhere one side (hook or loop) of the Velcro provided to the
back of the Air Compressor Monitoring Device by peeling off
the backing and firmly pressing on the Velcro.
Device Button
LED Light.
5
Advertisement
Table of Contents
