Programme Ae With Special Effects - JVC GR-DVX7EA Instructions Manual

44
RECORDING
EN
Operation Switch
A M
MENU/SET Dial
Display
4 P. AE OFF
/ EFFECT
FLASH ADJ 0
TO MODE MENU
END
P. AE / EFFECT
TWILIGHT
SEPIA
B/W MONOTONE
SEL. 4 CLASSIC FILM
STROBE
1 SLOW 4X
2 SLOW 10X
PAUSE
The indicator for the selected mode appears, and the
selected mode is engaged.
Advanced Features For Video And D.S.C. (cont.)
Lock Button
Power lamp
Power Switch
Recording Menu
P.AE/EFFECT Menu

Programme AE With Special Effects

IMPORTANT:
If certain Fades or Wipes (
modes of Programme AE with special effects cannot be
used. If you select a mode that is unusable in the current
situation, the mode's symbol blinks.
You can choose any one of the effects from the P.AE/
EFFECT Menu.
1
SELECT OPERATION MODE
Set the Operation Switch to "
Switch to "
the Lock Button. Pull out the viewfinder fully or open
the LCD monitor fully.
2
ACCESS RECORDING MENU
Press MENU/SET. The Recording Menu appears.
3
ACCESS "P.AE/EFFECT" SELECT MENU
Rotate MENU/SET to move the highlight bar to "P.AE/
EFFECT", then press it.
4
SELECT MODE
Move the highlight bar to the desired mode by
rotating MENU/SET, then press it.
•The P.AE/EFFECT Menu disappears and the selected
mode is activated. The symbol of the selected mode
appears.
5
DISABLE MODE
To turn off the selected mode, re-access the P.AE/
EFFECT Menu and move the highlight bar to "OFF"
by rotating MENU/SET. Then press it.
NOTES:
Programme AE with special effects can be changed
during recording or during Record-Standby.
The following modes are available only when the Power
Switch is set to "
and "VIDEO ECHO".
pg. 43) are activated, some
". Then set the Power
" or " " while pressing down
": "CLASSIC FILM", "STROBE"