Sam600 Serial Numbers - ABB SAM600 Engineering Manual

1MRK 511 431-UEN -
4.6.2
SAM600 Process Bus I/O System
Engineering Manual
The following selections are possible using the Technical Key Editor.

Use the existing technical key in SAM600 system

Use the existing technical key defined for a SAM600 system object in
PCM600

Set a user defined technical key, which changes the technical key for both the
physical SAM600 system and SAM600 system object in PCM600
The maximum length of the technical key for IEC 61850 Edition 2
is 64 characters, where the recommended length is less than 32
characters.
Click the OK button to confirm the selection. It is not possible to set a user
defined name or select the Technical Key in SAM600 system if the value
already exists in the PCM600 project. A warning message is displayed on
adding the duplicate technical key.

SAM600 serial numbers

The Serial Number of a SAM600 module is a global unique module identifier
within the module type. The serial numbers of SAM600 modules have to be
entered before writing the configuration to a SAM600 system.
The serial number can be set using one of the following scenarios:

SAM600 System Configuration Wizard (only in offline mode), see

Composition Upgrade Tool

PCM600 Object Properties

Get Serial Number command at a SAM600 system level (only in online mode)
If the entered serial number is incorrect, the appropriate validation
errors are displayed.
Section 4
Setting up a project
Figure 14.
23