JVC GR-DV2000ED Instructions Manual page 66

66
EN
Connector
cover**
To EDIT
Editing
cable
(provided)
To
S-VIDEO IN
To Remote
PAUSE or
R.A.EDIT
To PAUSE IN
DISPLAY
* Connect when an S-Video cable is not used.
** When connecting cables, open this cover.
USING THE REMOTE CONTROL UNIT
To AV
To
S-VIDEO
Audio/Video
cable
(provided)
S-Video
cable
(provided)
White to
AUDIO L IN
Yellow to Red to
VIDEO AUDIO R
IN* IN
VCR
TV
MAKE CONNECTIONS
Also refer to pg. 54 and 55.
1
A JVC VCR equipped with a remote pause
connector . . .
... connect the editing cable to the Remote
PAUSE connector.
A JVC VCR not equipped with a remote
pause connector but equipped with an
R.A.EDIT connector . . .
... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
... connect the editing cable to the remote
control's PAUSE IN connector.
2
Insert a recorded tape into the camcorder and set the
Power Switch to "
Lock Button located on the switch.
3
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR's instructions).
NOTES:
Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they do,
they will be recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen (
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen ( pg. 41).
•Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set "ON SCREEN" to "LCD" or "LCD/TV" in the
Menu Screen (
remote control.
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.
" while pressing down the
pg. 41).
pg. 41). Or, press DISPLAY on the
(cont.)